790011
49
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
POWER SUPPLY FAILURE
When power supply is resumed, the signal light on the
Start/Pause button will flash.
To resume the drying process, press Start/Pause.
END OF THE DRYING PROGRAMME
At the end of the drying programme, »End« will appear on the display unit, and the two red
indicator lights will light up. The Start/Pause button light and Anti Crease time indicator,
ifactivated or selected, will flash.
1. Open the dryer door.
2. Clean the filter (see the section »MAINTENANCE AND CLEANING«).
3. Take the laundry from the drum.
4. Close the door!
5. Switch off the dryer (press the On/Off button).
6. Empty the condensate tank.
7. Unplug the power cord from the outlet.
After the end of the drying programme, immediately remove the laundry from the dryer to
prevent it from creasing again.
SAVING PERSONAL SETTINGS
Initial settings may be changed.
When the programme and additional functions are selected, you may store such a combination
by pressing the Start/Pause button and holding it for five seconds. An indicator light on the Start/
Pause button and an acoustic signal will confirm your selection. »S C« (settings changed) will be
displayed briefly on the display.
Press the Start/Pause button to start the drying process.
The changed combination will appear every time you switch on the dryer.
Follow the same procedure to change a previously saved combination.
PERSONAL SETTINGS MENU
Switch on the dryer by pressing the On/Off button. To open the personal settings menu,
simultaneously press the positions START DELAY [startuitstel] and ANTI CREASE
[anti-kreuk] and hold them for 3 seconds. The symbols for START DELAY, DRYING TIME,
FILTER, and CONDENSATE TANK will be lit on the display unit. Number 1 will appear on the LED
display, indicating the settings function. Rotate the programme selector knob to the left or to
the right to choose the function to change. Number 1 indicates sound settings and number 2
indicates resetting of Personal programme settings to factory defaults. If the desired settings
are not selected in 20 seconds, the programme will automatically return to the main menu.
English 49
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Inventum VDW9001B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info