Bedienungsanleitung Inventum VR552 (Seite 15 von 24) (Englisch, Holländisch)

616194

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

appliance description

before the ﬁrst use

Before you use the appliance for the ﬁrst time, please do as

follows: Carefully unpack the appliance and remove all the

packaging material. Keep the material (plastic, polystyrene and

cardboard) out of reach of children. Check the appliance after

unpacking for any damage, possible from transportation. Place

the appliance on a ﬂat and stable surface. Make sure there is

enough open space around the appliance for the intake and/or

outlet vents. A minimum clearance of 10 cm is required between

the appliance and any adjacent walls. The freezer needs good

ventilation for easy dissipation of heat, high efﬁciency of

refrigeration and low power consumption.

You can level the appliance using the adjustable feet.

Do not place the appliance near a heat source such as a heater

or furnace.

Mount the enclosed handle on the desired side of the door

with the enclosed screws and place the enclosed caps on the

other side for a nice ﬁnish. Attention: never lift the freezer by

the handle.

Leave the appliance to stand for at least 3 hours before you

insert the plug into the socket.

First clean the interior of the appliance. Use warm water and a

neutral detergent. After cleaning, rinse the interior with clean

water and rub dry. Leave the appliance to dry for 1 to 2 hours.

The appliance features internal controls. Set the thermostat

on setting 3. Check that the voltage in your home corresponds

with the voltage printed on the back of the appliance and plug it

in a socket. The appliance now cools continuously until the set

temperature has been reached. Do not place anything in the

freezer until the set temperature is reached. This usually takes

2 or 3 hours. Then set the thermostat at the desired setting and

place food into the freezer.

using freezing compartment

The freezer compartment enables you to preserve frozen food,

freeze fresh produce and to produce ice cubes.

Setting MIN = minimal cooling, warm

Setting MAX = maximal cooling, cold

In general setting “NORMAL” is used for freezing.

Check that the voltage in your home corresponds with the

voltage printed on the back of the appliance and plug it in a

socket. The appliance now cools continuously until the set

temperature has been reached. Do not place anything in the

freezer until the set temperature is reached. This usually takes 2

or 3 hours. Then place food into the freezer.

Note:

The ambient air temperature, how often the door is opened

and the position of the appliance can affect the internal

temperature. These factors must be taken into account when

setting the thermostat.

• Do not freeze too large an amount of food at one time;

the faster the food is frozen, the longer is preserves its

qualities.

• Do not put hot food into the freezer.

• Never introduce volatile, inﬂammable or explosive ﬂuids

such as alcohol, acetone or petrol because of the risk of

explosion.

• Do not store glass bottles or containers with liquids in

1. Top panel

2. Thermostat

3. Handle

4. Adjustable feet

5. Freezer compartments

VR601 - 3 lades

VR551 - 4 lades

4 4

English • 15

VR552-VR601-instructions-0115.indd 15 26-1-2015 13:56:16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum VR552 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info