Bedienungsanleitung Inventum YK010 (Seite 22 von 56) (Deutsch, Englisch, Holländisch, Französisch)

704950

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

using the appliance for the ﬁrst time

Before using the appliance for the ﬁrst time, you should proceed as follows: carefully unpack the appliance and remove

allpackaging material and any promotional stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out

ofthereach of children. After unpacking the appliance, check it for external damage that may have occurred during

transport. Place the appliance on a sturdy, ﬂat surface and make sure there is enough space all around for sufﬁcient

ventilation. A minimum space of 10 cm is required between the appliance and the surrounding walls. In this way

theappliance is able to release heat properly, cool well and function in an energy efﬁcient way. You can use the adjustable

feet to level the appliance. Do not place the appliance near heat sources such as central heating or a stove. Do take note

ofthe climate class of the appliance. When placed in a room that is too cold, the larder will not function properly.

After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.

First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose

cleaner orsoda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry.

Leavetheappliance to dry for 1 to 2 hours.

use

The control unit of the appliance is located on the inside. Check that the thermostat is off in position 0.

Checkthatthevoltage corresponds with what is stated on the information plate and insert the plug in the socket.

Adjusting the temperature

By means of the thermostat you are able to change the temperature in the larder.

Thepossible positions of the thermostat:

Switch off appliance – position 0

Maximum temperature – position 1 (least cold)

Optimum temperature – positions 2-5

Minimum temperature – position 7 (coldest)

Set the temperature with the thermostat and select a position between 1 and 7. We recommend setting the appliance

toposition 4. The appliance will now cool continuously until the set temperature has been reached. Allow the appliance

toreach the required temperature with no food. Usually this will take 2 to 3 hours. After that, you can set the thermostat

tothe required position and ﬁll the appliance with food.

Internal temperature of the larder

Adjusting the temperature to the changing seasons is not recommended. The increase in ambient temperature is detected

by the sensor and the compressor will automatically work longer to maintain the required internal temperature.

Minor changes in temperature

Minor changes in temperature are normal and can be caused by storing a large number of fresh products in the larder,

orby leaving the door open for a longer period of time. The food is not affected, and the temperature quickly returns

tothenormal value.

Set the thermostat to position 0 to switch off the appliance.

Attention:

The ambient temperature, the frequency of opening the door and the position of the appliance have an effect

onthetemperature in the appliance. Take this into account when setting the thermostat.

• Do not place hot food in the appliance.

• You should never place hazardous, highly ﬂammable or explosive substances such as alcohol, acetone or petrol

intheappliance, because there will be a hazard of explosion.

• Carefully package meat and ﬁsh to prevent unpleasant smells.

• Leave sufﬁcient space between the different foods, to allow the air to circulate properly.

• Do not place food against the rear wall of the appliance. The shelves have a stopper to prevent this.

• Do not leave the door open for longer than necessary.

22 • English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum YK010 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info