Bedienungsanleitung Inventum YK010 (Seite 25 von 56) (Deutsch, Englisch, Holländisch, Französisch)

704950

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

resolving failures yourself

Breakdown Cause Solution

The appliance

no longer works

There is an interruption

inthepower supply.

- check that the plug is properly inserted in the socket

- check that the power cable is not damaged

- check that there is voltage on the socket by connecting

adifferent appliance, such as a night lamp

- check that the appliance is on by setting the thermostat

higher than 0

The interior lighting

doesnot work.

The lamp is defective or the plug

is not in the socket.

Check the solutions above or have the lamp replaced.

Temperature in the larder

is too high or too low

Wrong setting of the thermostat. - turn the thermostat to a different position

The ambient temperature is

higher or lower than the

temperature indicated in the

table with technical data.

The appliance is intended for operation in an

ambient temperature indicated in the table with technical

data supplied with the appliance.

The appliance is located in direct

sunlight or near a heat source.

Change the location of the appliance according

totheinformation in the instruction manual.

The ventilation at the rear of the

appliance is hindered.

Keep the appliance 10 cm away from the walls,

forsufﬁcient ventilation.

The door of the larder is opened

too frequently or remains open

for too long.

Open the door less often and/or reduce the time that

thedoor remains open.

The door is not closed properly. Make sure the foods are placed in such a way that they

donot hinder the door when it is being closed.

The compressor does not work

often enough.

Check that the ambient temperature is not lower than

therange of the climate class.

The door rubber is loose. Fasten the door rubber or have it replaced.

The appliance is working

continuously.

Wrong setting of the thermostat. - turn the thermostat to a higher position

There is water

inthelower section

ofthe larder.

The opening of the defrost water

drain is clogged.

Clean the opening of the defrost water drain by means

ofthe skewer.

The ventilation within the cooler

section is hindered.

Check that the food does not make contact with the rear

wall of the refrigerator.

Unusual or loud noises

The appliance is not level

andstable.

Level the appliance with the adjustable feet.

The appliance is standing against

something.

Place the appliance in such a way that it is not standing

against anything.

During normal use of the cooling appliance, different types of noises can occur that do not have any effect on the correct

operation of the larder.

Noises that can be easily remedied:

• Noise due to the fact that the appliance is not level – position the appliance using the front adjustable feet. If necessary,

place soft material under the rear wheels, particular in case of a tiled ﬂoor.

• Friction against other furniture – move the appliance.

• Grinding of drawers or shelves – remove the shelf or drawer and then place it back.

• Noise of colliding bottles – place the bottles apart.

Noises that can be heard during normal use of the appliance are caused by the operation of the thermostat, compressor

(activation), cooling system (shrinkage and expansion of the material under the inﬂuence of temperature differences

andﬂow of cooling liquid).

English • 25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum YK010 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info