Bedienungsanleitung Inverto IDL 3290S-CI (Seite 23 von 144) (Deutsch)

510488

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

remain unchanged.

Note: If the menu is not displayed clearly or in black and white, after changing the settings, it is because the

Video output mode was changed when you reset the unit to default settings. To correct this problem see chapter

Audio/Video Settings.

Preprogrammed Channel Lists

Use this option to reset your TV channel lists to the

receiver’s preprogrammed default program lists.

SYSTEM INFORMATION

This menu displays information related to the software

and hardware version of the receiver as well as the

option to update the software. This information may be

required if you request service or repair.

PRODUCT INFORMATION

Use this option to display the product information,

such as the software and hardware version. This

information may be required when you call customer

service.

Software update

There are two ways to update the software of the digital receiver:

Over The Antenna (OTA), and through the USB port. In the next chapters you can nd more detailed information

about OTA and USB. From the Settings Menu, select System Information and then Software Update.

SOFTWARE UPDATE VIA ANTENNA (OTA)

If “Auto Upgrades” in the User Preferences is set to “Auto”, the receiver will do this all in the background during

stand by. At the rst start after such an update, the receiver will show you a popup message with the information,

that your receiver got a successful update.

During the OTA software update, the unit will rst search for the update signal.

During the search, a message box “Software update” will be displayed on the TV screen – this process may take

several minutes. To stop this process, press the “Red” function key or “Exit” key. If new software is available,

the user will be informed and asked to conrm the download.

The user will be asked to conrm the download two times, to help prevent accidental changes.

During the download, the “OTA” message will be displayed on the TV screen, showing the progress bar. After all

data has been received, the receiver will update the current software and automatically restart.

All user preferences and channel lists will remain unchanged.

Note: OTA Updates are broadcasted over ASTRA 19.2E satellite and therefore are not available in all the

countries.

SOFTWARE UPDATE VIA USB

The software can be updated using a USB mass storage device.

To update the software using a USB mass storage device, you will require the new software le from our website

and a USB device, such as a USB hard disk or memory stick.

a) Copy the software bin le to the root folder of the USB mass storage device.

b) Turn the receiver on and allow it to boot up.

c) From the Settings Menu, select System Information.

d) Insert the USB mass storage device into the USB slot on the front panel of the receiver.

e) The message “USB – Mounting” will appear at the top of the screen. After it changes to “USB – Init: OK” it is

ok to proceed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inverto IDL 3290S-CI Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info