Bedienungsanleitung Inverto IDL5550S (Seite 12 von 124) (Deutsch, Englisch, Holländisch, Französisch)

459176

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

(Now/Next EPG). The duration that this message is displayed

can be set, from 1 to 9 seconds.

Soundtrack

Some programmes are broadcasted in different languages. If

a multi-lingual programme is broadcast, then it is automatically

set to the language of your preference.

Primary Subtitle Language

Some programmes are broadcast with different subtitles.

If multi-subtitle programmes are broadcast, then it is

automatically set to the language of your preference.

History depth

You can set the history of previously selected programmes

from 1-5, and then use the “Last” key on the remote control to

switch between them.

Quick Save List

You can use this option to specify into which favourite list your favourites will be automatically saved. You may

select from the list of existing favourite lists or choose “Select FAV from list” to allow you to choose the location

later, while adding favourites.

OSD colour

You can change the colour of the user interface with this option.

EPG font size

This option allows you to change the size of the text in the EPG, to allow you to see more or less data at once.

Power Up Mode

This option allows you to set the unit to automatically change to a specic mode during power-up. If you select

“Stand-by mode”, the receiver will go into stand-by immediately after power-up. If you select “Last mode”, the

receiver will change to the same mode it was in, prior to switching it off.

Note: The receiver is able to switch on some TV sets that use the “Slow Blanking” signal on the SCART

connector. If “Last Mode” is selected, the receiver and TV will power-up at the same time.

Auto Upgrades

By choosing “Notify”, you will see a

symbol in the upper part of the OSD when a new update is available.

By choosing “Auto” your receiver will be automatically updated while in stand by.

ANTENNA SETTINGS

To set up the receiver for the type of antenna connected, follow

the instructions below.

Signal strength and signal quality bars

In two level bar meters, on the right side of the screen, the

user can see the strength and quality of the signal coming from

the antenna dish to the tuners. These two meters can be used

while doing a ne-tuning of the antenna position. The antenna

has to be adjusted to have maximum possible signal strength

and signal quality.

LNB Type

Select Universal for most standard LNBs, or Unicable if you

have a Unicable LNB.

Motor System

If a motorized dish is connected to the digital receiver, use this option to set the system used for sending

commands to the motor.

Motorized dish

If you select one of the options for motorized dish and press the “Yellow” function key, a new menu bar will be

open. Here, you are able to adjust and set the position of this satellite. The two level bar meters can be used

during adjustment. Use the color keys on the remote control, as shown at the bottom of the screen, to move the

dish and set the limits.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inverto IDL5550S Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info