Bedienungsanleitung Inverto IDL7000m TCI (Seite 19 von 125) (Deutsch, Englisch, Französisch, Spanisch, Spanisch, Finnisch)

509749

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite

4. Electronic Programme Guide (EPG)

The EPG can increasingly take over the function of a programme guide. The EPG gives you an overview

of the actual broadcast programmes as well as the pending programmes in the course of your favourite

list.

Tip: The error message "No data" means, that the data is not provided by the channel, or the data is not

yet downloaded.

4.1 Programme information (Now/Next)

Each time you switch channels there is a brief message on screen, displaying the programme name, current

time, starting and end time, title and content of the current programme. The elapsed time bar graph display

indicates how much of the programme‘s total broadcast time has already elapsed. In addition, the starting

and end times, as well as the title of the next (following) programme is displayed.

You can specify how long this (and any other) information should be displayed on screen (go to “Installation

/ Setup”, then select entry “Display Settings”, followed by “Popup Time”).

By pressing the blue key, the same screen does appear with additional details about the programme, it

is possible to scroll the time with the Left/Right navigation key and a reminder can be set/ deleted with the

“OK/Menu” key, then when a reminder will appear, a popup will inform the viewer.

As you can mix TV and Radio programmes in a list, the Teletext hotkey allows to switch between the Main

TV and Main Radio lists.

The programme information can additionally be called up by pressing the „INFO” key.

4.2 Calling up the Channel Guide

You can access the electronic Channel guide at any time by pressing the “EPG” key (green function key)

on the remote control. You can also access the EPG via the Main Menu. Here, you must use the directional

keys to select the entry “TV Guide”, then confirm by pressing the “OK/Menu” key.

Timer programming:

The receiver is able to display the programmes available on the channel currently selected, indicating the

current programme as well as all following programmes.

This allows you quickly to obtain an overview of all programmes being broadcast that day, and possibly

those of the next day as well.

Use the blue function key on the remote control to move 24 hours forward or the yellow key to move 24

hours back to move within the frame of the next 24 hours.

With the directional key up/down select the channel, of which you require more information. Pressing the

directional key right you will reach the additional programme date, by each pressing of the directional key

right the outstanding programmes will be marked in single steps. You get back to the previous programmes

by pressing the directional key left.

If you want to record a marked programme press the OK/Menu-key.

The receiver switches to the mode Personal Planner reserves the selected programme for recording.

Define the recording preferences like described in chapter 3.

Recording specifications.

The range of this overview (i.e. how many programmes are shown in advance), is determined by

the channel and can differ from one programme to the other.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inverto IDL7000m TCI Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info