Bedienungsanleitung Ion Air Pro Plus (Seite 1 von 2) (Englisch)

477235

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Thank you for purchasing the ion AIR PRO HD sports video camera. The ion

AIR PRO can be mounted with the Bike & Helmet Kit or the BOARD Kit

for the ultimate adventure HD recording experience.

Getting to know your AIR PRO camera

 AIR PRO is a Professional, High Quality Digital Video Recorder that

records in Full HD video by using an easy slide switch

 It also has the latest 5 Mega Pixel Sensor for you to take great digital

photographs

 Your camera supports a MicroSD card up to 32GB, which allows you to

take video in 1080p with 30 frames per second for about 4 Hours.

 The embedded 1200mAh Li-ion Battery can be recharged quickly.

 The Waterproof Housing lets the camera perform up to 10 meters under

water.

 AIR PRO is lighter than 4.5 ounces or 123g.

1. Getting to Know Your Camera

Power

1. Turn the camera on or off

2. Take single photograph

LED indicator Show the camera status

Recording Slide

Switch

Slide to start or stop video recording

Lens High quality lens

MicroSD card slot MicroSD card storage location.

AV port Connect the camera to TV via Composite cable

Mini HDMI Port Connect the camera to TV via HDMI cable

Video Resolution

Switch

Select video resolution: FHD (Full HD) or HD.

USB Port

1. Connect to computer for data transfer or

camera setup

2. Charge your camera

10 Reset button Reset the camera

PODZ Socket

Connect PODZ to the camera to achieve

additional function

2. Using Your Camera

2.1 Charging up Your Camera

Charge your camera with either the USB cable or AC/DC adapter. The red LED lights up

to indicate the camera is charging and turns off as soon as the camera has been fully

charged. It takes about 3 hours to fully charge the camera.

2.2 Inserting a Memory Card

Insert a MicroSD card (not included) before using your camera. Assure that the camera

power is turned OFF before inserting the card to the slot.

Notes

1. There is only one correct direction to insert the MicroSD card into the slot. Do not force

the card into the card slot as it may damage both the camera and the MicroSD card.

2. A new MicroSD card should be formatted before using. For more information, please

see section 3.1 and 3.2

2.3 Set up Date and Time

Connect your camera to a computer and run the ion software from the MicroSD card

folder. You can set date and time on the camera through the settings page. Please see

section 3.1 to open ion software

2.4 Recording Video

Before starting recording, select the video resolution by switching the Video Resolution

Switch

There are two methods available for starting the video record function. When starting a

video recording, a short vibration indicates recording started. The LED indicator

illuminates RED throughout the recording.

1. Whether the camera power is ON or OFF, simply slide the Recording Slide Switch

from STOP to REC to start recording.

2. When your camera is OFF and the Recording Slide Switch is at REC location,

press and hold the Power button to turn the camera ON and it will start recording.

Move the Recording Slide Switch from REC to STOP to stop recording. The

camera will vibrate and the LED indicator will illuminate GREEN to indicate the recording

has stopped. The camera will then enter Standby mode.

An additional option is to hold the Power button to stop the recording and turn the

camera off. The camera will vibrate two seconds and the Green LED light will turn off.

Notes

1. An additional WQVGA (432x240) video file will be created simultaneously with the

recording of an HD/FHD video file. The smaller WQVGA file size allows for more efficient

uploading of content to social media sites and email.

2. Changing video resolution is disabled during video recording.

3. There will be around 1-2 seconds delay before the camera starts recording.

4. The various video resolution options for HD and FHD can be changed under the

“Settings” selection in the ion software.

2.5 Taking Photos

1. Turn on the camera by pressing the Power button.

2. After the camera power has been turned on, press the Power button to take a

photo. A short vibration and a flash of Green LED indicate the action was successful.

Notes

1.The Still Photo function is disabled during video recording.

Quick Start Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ion Air Pro Plus Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ion Air Pro Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info