519157
46
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
Chapter 6: External Triggering
40 DM5 Reference Manual
ABOUT TRIGGER PARAMETERS
The DM5 now offers five
user controllable trigger parameters. These are:
VCrv. (Velocity Curve). This represents the velocity curve, or the sensitivity of
the trigger input. There are eight separate curve tables, 0 through 7. Using these
settings it is possible to adjust the DM5’s triggers to accompany a wide variety of
playing styles, and to help compensate for sensitivity variances between
different brands of drum pads and triggers.
The lower the setting, the less sensitive the velocity curve and the higher the
setting, the more sensitive. For example, a pad using a setting of 7 will reach a
MIDI velocity of 127 with just a moderate strike. For a pad whose velocity curve
setting is 1, only a very hard hit would generate such a velocity.
For average type of play (striking pads with velocities ranging from very soft to
very hard) the default setting of 4 is ideal in achieving the full range of
sensitivity which corresponds to MIDI velocities of 1 through 127.
Note: Curve 0 is named “Unassigned”. The function of this curve is explained fully
in the section entitled “Velocity Curve” on page 44.
Xtalk. (Crosstalk). Sometimes hitting one pad will cause a nearby pad to false
trigger or “crosstalk”. This is generally due to stand vibrations which can affect
the other pads. These vibrations send signals to the nearby pads which can cause
false triggering. The Xtalk adjustment acts as a suppression control.
A higher value adjustment equals greater suppression of the signal, a lower
value equals less suppression. Therefore, the higher the value setting, the less
likely the nearby pad (or drum) will trigger from stand or head vibrations.
This is how it works:
First, you strike a pad and the DM5 triggers its sound. Shortly after this hit the
DM5 receives a secondary, “softer” signal from a nearby pad. Before the DM5
will play this softer signal, it will scan the other inputs to determine whether this
was a legitimate hit, or simply a vibration from a stand or head.
It does this by comparing the level of this soft signal with the threshold level set
in the Xtalk parameter. If this secondary signal level is greater than the allowable
threshold level, the DM5 will trigger its sound. If the signal is less than the
allowable threshold level, the DM5 will ignore it.
By adjusting the crosstalk level to a higher value, you set a higher threshold for
the signal to exceed, and reduce the ability of a pad (drum) to crosstalk. The
following chart shows a scenario with a properly
adjusted Xtalk level.
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ion ALESIS DM5 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info