Bedienungsanleitung IONIK TP7-1000DC (Seite 51 von 55) (Deutsch, Englisch)

521849

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

36 37

4-1-1 WI-FI Connection

Click the shortcut on the main screen, select “Internet Connection

Manager”, click “WI-FI setting”, then enter the Wi-Fi setting screen,

now select “WI-FI” and activate it.

After WI-FI has opened, it will automatically search for wireless net-

work, this shows on the menu, now click wireless network, enter the

password screen, and now input the password and connect. Seconds

later, the system will connect to wireless network automatically.

When WI-FI is open, this will make the machine use 25 %

more power. When not using WI-FI, please turn it off to

extend the battery life.

4-2 Ethernet Setting

Using the Ethernet card (USB-RJ45) when connecting to the Internet.

There are two requirements needed to use USB-RJ45 to connect to

the Internet, and these are detailed below:

1. ADSL account and password are set up correctly on router.

2. USB-RJ45 network card is the model which is supported by this

device.

Models supported are listed below:

AX88772/AX88772a/AX88772B/AX88178/AX88760/QF9700/

SR9600/MCS7830/MCS7832/MCS7730

Steps for Internet Connection:

First connect the network cable to the USB Ethernet card, then insert

the USB OTG cable which is meant for this device into USB Ethernet

card and the other end into USB port of the device.

Notes:

1. First close the WI-FI network, only one network can be used,

otherwise there will be errors.

2. This device will automatically detect the USB Ethernet card and

switch on the “Ethernet”. There will now be a network icon in the

status column.

3. Wait a moment, as this device will try to connect to Internet

automatically. If the router and the DHCP service are already

open, and the netgate, DNS and relevant settings have been

applied, then the device will connect to the Internet automatically.

(The Ethernet card function must be selected already).

4. If the device fails to connect, usually this is because the settings

in the router are not correct.

You can set the parameters in the device as follows:

a. Enter setting/Ethernet setting, select and open Ethernet.

Enter conguration information, choose “static IP setting”, then

enter the static IP setting screen (the default setting is auto-

matic aquiring IP. Usually, automatic aquiring IP is ne for

everything, but some companies‘ routers will use specied IPs,

not allowing automatic aquiring IP, it depends on router

settings, therefore static IP needs to be used at this time).

b. There is no need to ll in the Ethernet card device and physical

address. The machine will automatically detect this, after

successfully connecting the Ethernet.

In the IP address column, enter the IP address, the default

usually being 192.168.1.1xx.

c. In “subnet mask”, enter network segment mask, the default is

255.255.255.0.

d. In the “DNS server”, enter your local network service provider‘s

DNS server IP. A different location has a different DNS server IP

- if you are unsure, you can search by Google.

e. Enter the gateway in the „default gateway”. The general default

is 192.168.1.1 (you can check the router‘s manual for conrma-

tion). It must be set to the same as the router; otherwise

connection will be shown, however cannot connect to the

Ethernet.

f. Finally, click the lower right corner of the “Save” button, then

select Save. The system will automatically connect after saving,

then you can use the Ethernet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

IONIK TP7-1000DC Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info