Bedienungsanleitung IPSO HF 234 (Seite 16 von 22) (Englisch)

462567

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Remarks:

Freely programmable stop-function

Before starting a program it is possible to preprogram a time stop in every

program segment. This function permits special additional functions like adding

bleach or extra detergent to the wash bath.

Programming:

After selecting the program, press the ECO-button (E) and keep it depressed.

Now push the START-button (S) simultaneously and release same. Only now

release the ECO-button (E).

The left display now shows “StO” (Stop) and the right display shows the program

number. The first program sequence LED is switched on.

Confirm by pressing the START-button (S) if a time stop is required in this phase

of the program. If no time stop is needed, press the ECO-button (E) to move on

to the next segment of the program. Run through the entire program in this way.

If needed, return to previous segments by pressing the SELECT-button (P).

Errors can be corrected by returning to the erroneously programmed time stop

in the segment and correcting by pressing the START-button (S).

After the final program segment all programmed time stops will be displayed and

the left display will show “End”. Confirm this program by pressing the START-

button (S) again. Now start the program.

Operation:

When a stop is reached during the run of the program, the time will be stopped.

The wash bath will be filled to the appropriate level and temperature and the

programmed wash action is executed.

The left display will alternately show temperature and “StO”, while the central

display is showing “F1”. Now, if so desired, additional detergents can be added.

When this has been done, press the START-button (S) to continue the run of

the program. To remove any possible remains of corrosive products in the tub,

the machine will rinse an additional 2 seconds.

Programmable automatic start

By using this function a program can be started up to 99 hours later.

Programming:

After selecting the program, press the SELECT-button (P) again and keep it

depressed.

Now push the START-button (S) simultaneously and release same. Only now

release the SELECT-button (P).

The left display now shows “DEL” (Delay). The central display shows “10”

(minutes). Every push on the SELECT-button (P) will add 10 minutes to the

delayed start time. Hours and minutes are separated by a decimal point: 1.5 stands

for 1 hour and 50 minutes. After 10, the counting is done by hours.

By pressing the ECO-button (E), the delay time can be counted down.

Operation:

After having set the desired delay time, the count-down can be started by

pressing the START-button (S). During the count-down the displays blink and

the remaining time is counted down. In the last hour the displays blink faster.

When the delay time has elapsed, the program is started automatically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

IPSO HF 234 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info