Bedienungsanleitung Irobot Looj 300 Series (Seite 22 von 28) (Englisch)

632870

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

22 iRobot Looj 300 Series Owner’s Manual

Remote Control Handle LED: What it means

Solid Green This indicates that the power is on, battery is charged, and all

communication is okay. This light will only be on when robot is

moving.

SlowBlinkingGreen This occurs for 5 seconds to indicate that the remote has connected

to the robot.

Solid Yellow This indicates that the robot and remote have a low signal strength.

Stop forward progress and return the robot to you. Driving the robot

out of range risks losing communication and control of the robot.

SlowBlinkingYellow This occurs for 15 seconds to indicate that the remote has lost

connection with the robot. If this occurs, move closer to the robot

makingsureyouarewithinrangeoftherobot-15m(45ft).Also,

make sure that the robot is powered on.

FastBlinkingYellow This indicates that the robot has sensed tough debris. The robot will

over-ride your commands until it is clear of the debris, at which point

youcanbegincommandingtherobotagain.Note:Thiswarningdoes

notoccurin“CLEAN”mode.Therobotwillchangeitsbehaviors

automaticallyin“CLEAN”mode.

Solid Red This indicates that the robot has encountered a failure. You must

retrievetherobotandattempttoresetthepowerbutton.Makesure

to clear the robot of any debris jams and ensure all batteries are fresh

or fully charged. If the solid red LED remains, please call a cutomer

care representitive to help troubleshoot your robot.

SlowBlinkingRed This indicates a low battery. If in use, return the robot to you

immediately, then charge the robot’s battery and use fresh batteries

in the remote.

Robot LED: What it means

Solid Green This indicates that the power is on, the battery is charged and all

communication is okay.

SlowBlinkingGreen This occurs for 5 seconds to indicate that the robot has connected

to the remote.

Solid Yellow This indicates that the robot has a weak signal strength.

SlowBlinkingYellow This occurs if the robot has lost connection with the remote.

FastBlinkingYellow This indicates that the robot has sensed tough debris. The robot will

over-ride your commands until it is clear of the debris, at which point

youcanbegincommandingtherobotagain.Note:Thiswarningdoes

notoccurin“CLEAN”mode.Therobotwillchangeitsbehaviors

automaticallyin“CLEAN”mode.

Solid Red This indicates that the robot has encoutered a failure. You must

retrievetherobotandattempttoresetthepowerbutton.Makesure

to clear the robot of any debris jams and ensure all batteries are

charged. If the solid red LED remains, please call a cutomer care

representitive to help troubleshoot your robot.

SlowBlinkingRed This indicates a low battery. If in use, return the robot to you

immediately, then charge the robot’s battery and use fresh batteries

in the remote.

Indicator Lights

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Irobot Looj 300 Series Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Irobot Looj 300 Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info