Bedienungsanleitung Irobot Roomba 790 (Seite 5 von 9) (Englisch)

490143

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Remote Control

You use this just like your TV remote, pointing and clicking it to turn your Roomba on

and off, steer it, and control the SPOT and DOCK (...) functions.

• First, install 2 AA batteries (not included).

• If you use it near a Virtual Wall or the Home

Base, it may get confused and not work.

Wireless Command Center

Optional accessory for models 780 and above.

Use this to turn your Roomba on and off, schedule up to seven cleaning times a week

and steer it.

Scheduling your Roomba

This lets you tell your Roomba exactly when to clean, even when you’re away

from home. You can schedule Roomba to clean once per day, up to seven times

per week.

Setting the time

1. Turn ON your Roomba by pressing CLEAN.

2. Press CLOCK.

3. Use DAY, HOUR and MINUTE individually to set the correct time.

4. Press OK to save changes. To exit or cancel press CLEAN and start again.

Setting 12 / 24 hr

To switch between the two views, press and hold CLOCK until the display shows

12h or 24h. Then press CLOCK to switch and press OK to save changes.

Roomba’s clock will switch back to the default 12 hour (AM/PM) format when

Roomba’s battery is disconnected or signiﬁcantly discharged.

Setting a schedule

You can schedule your Roomba to clean once a day, up to seven times a week.

You must set the internal clock before setting a schedule.

1. Turn ON your Roomba by pressing CLEAN.

2. Press SCHEDULE.

3. Use DAY, HOUR and MINUTE individually to set the schedule.

4. Press OK to save changes. To exit or cancel press CLEAN and start again.

Viewing a schedule

1. Turn ON your Roomba by pressing CLEAN.

2. Press SCHEDULE.

3. Press DAY to look through the scheduled cleaning times.

4. Press OK to save changes. To exit or cancel press CLEAN.

Deleting a schedule

1. Turn ON your Roomba by pressing CLEAN.

2. Press SCHEDULE.

3. Press DAY to look through the scheduled cleaning times.

4. When your Roomba is displaying the scheduled cleaning time you want to delete,

press HOUR until --:-- is displayed. Press OK to save changes.

5. To delete all schedules, press DAY for 5 seconds.

Changing a schedule

1. Turn ON your Roomba by pressing CLEAN.

2. Press SCHEDULE.

3. Press DAY to look through the scheduled cleaning times.

4. When your Roomba is displaying the scheduled cleaning time you want to change,

press HOUR and MINUTE individually to make the change.

5. Press OK to save changes. To exit or cancel press CLEAN.

A little maintenance goes a long way

To keep your Roomba working perfectly, it’s a good idea to do a little

maintenance regularly. In particular, please note the following:

• Look for the yellow parts – these are designed to be removed

and cleaned.

• You should empty the bin and clean the brushes after each use, if possible.

• Excessive hair build-up could permanently damage your Roomba or your oor,

so clean the brush bearings and brush caps regularly.

Controlling and Scheduling your Roomba | Regular maintenance

SPOT

Button

Directional

Buttons

CLEAN/power

Button

...

Button

7 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Irobot Roomba 790 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Irobot Roomba 790

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info