Bedienungsanleitung Irox CELEBRATION-66 (Seite 1 von 3) (Englisch)

578588

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

KSPO:1051-11(OST)

IROX OST32 MANUAL 2(Eng)

SIZE:W100 x H100(mm)

BY Lai HZ 25/11/11

CELEBRATION-66

Weather station with barometric forecast,

countdown to a target event

indoor thermo-hygrometer,

moon phase indication and radio controlled clock

2.2 Buttons

IFE

1. Introduction

2. Operating elements

2.1 LCD (display)

2.2 Buttons

2.3 Stand and battery compartment

3. Set-up

4. Extended operation

4.1 Weather forecasts

4.2 Temperature / Moisture

4.3 Time function

4.4 Target Date (Event) and Countdown

4.5 Moon phase

5. Troubleshooting

6. Battery Change

7. Care of the device

8. Support

9. Functions and technical data

1. INTRODUCTION

CELEBRATION-66 is a high quality radio controlled clock with weather forecast,

thermo/hygrometer and the possibility to easily program a target event with matching text

and have the remaining days, hours, minutes and seconds displayed as a 'countdown' timer.

Setting-up and using this device is easy. Please read chapters 2 and 3.

The other chapters explain a few details that might be helpful to you, for example if the

radio controlled clock does not receive a signal and/or you do not live within the central

European time zone.

In the original package you will find following parts:

• The main unit (the receiver)

• A table stand

• This Instruction Manual

2. OPERATING ELEMENTS

2.1 LCD (display)

All functions can be read from the liquid crystal display (LCD) in 3 windows.

A. CLOCK with MOON PHASE and WEATHER FORECAST

B. CURRENT DATE or TARGET DATE or COUNTDOWN TIMER

C. TICKER or TEXT with

- EVENT

- WEEKDAY OF THE EVENT (Selection of 19 languages)

- CURRENT DATE WITH CALENDAR WEEK (appears only if the current

date is not already displayed in window B)

- ROOM TEMPERATURE / HUMIDITY

E. event button

If an event is programmed you can use this button to select one of the following display

modes in window B.

- Current date with calendar week (standard, if no event is programmed)

- Programmed target date (event) with the hour

- COUNTDOWN timer to target date (event)

F. scrolling button

In window C you can display all additional information measured by or programmed in the

device. Use this button to switch the ticker on or off. If the ticker is activated the symbol

will appear and every 3 seconds new information will be displayed.

G. event set button

• Press and hold button for 3 seconds to move to the target date setting. Please read chapter

4.4 "Target Date (Event) and Countdown" !

• Navigate backwards in the 'Event Title' setting

I. set button

• Press and hold button for 3 seconds to move to the time setting. Please read chapter 4.3

"Time Function" !

• Navigate forwards in the 'Event Title' setting

H. ▲ button

D. ▼ button

• These buttons can be used to adjust the values for all settings. (▲) increase or (▼)

decrease. To quickly change a value in the setting, press and hold the ▲ or ▼ button.

• If the ticker mode is off you can also use these buttons to select available information in

window C

2.3 Stand and battery compartment

J. WALL- MOUNT hole

• A recessed opening to mount the unit on a wall

K. BATTERY COMPARTMENT

• Accommodate two (2) CR2032 batteries

L. FOLD OUT TABLE STAND

In addition you will find a separate table stand, giving the unit a special elegance when

positioned in a shelve or on a table.

3. SET-UP

Setting-up the CELEBRATION-66 is easy. Just follow the steps below.

1- Activate the batteries in the display unit: First a full segment display will appear on the

LCD for about 3 seconds.

2- Now the device will begin receiving the time from time signal transmitter DCF77 (the

corresponding symbol will blink). Wait until all information (time) are displayed

correctly by the device or until all symbols have stopped blinking. This may take a few

minutes.

You can now operate the device and for example enter an event with date, time and text.

In chapter 4 you will find details for optional settings and also information on certain

procedures.

Table of contents

.......................................................................................................

..........................................................................................

..............................................................................................

.......................................................................................................

.................................................................

..............................................................................................................

..........................................................................................

......................................................................................

..............................................................................

..............................................................................................

..........................................................

...............................................................................................

................................................................................................

...............................................................................................

............................................................................................

.............................................................................................................

...........................................................................

2019

2221

2423

2625

Irox CELEBRATION-66 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Irox CELEBRATION-66

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info