Bedienungsanleitung Irox PRO-X2 (Seite 21 von 33) (Englisch)

578609

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Note: The radio controlled signal for time (DCF77) is transmitted from the central atomic

clock in Frankfurt/Main in short intervals. It has a reception range of approx. 1500 km.

Obstructions such as concrete walls can reduce the signal range.

Sunrise/Sunset Mode

Themainconsoleunitcomputesthesunriseandsunsettimesfromtheuser-congured

location data. This includes the longitude, latitude, time zone and DST (Daylight Saving

Time). Choosing a suitable city code for your area will automatically generate the correct

values for the location data.

Should you wish to input your own location data or if a suitable city code could not be

found, choose “USR” as the city code during setup.

A searching function is also available, which allows the sunrise/sunset times for different

dates to be viewed.

Accessing Sunrise/Sunset Mode

From the main console unit: Press UP or DOWN until the sunrise and sunset icons

onthelowerleftofthedisplaystartashing.

From the remote control: Press .

Setting up the Location Data

1. In Sunrise/Sunset Mode, press and hold SET to enter location data setup.

2.ThecitycodeintheTimeandAlarmdisplayshouldstartashing.

Set City Info:

Press UP or DOWN to select city code for your local area. Refer to P.31 for a list of

available codes. The corresponding longitude and latitude will be shown along with the city.

Should you wish to input your own geographical coordinates, choose “USR” as the city code

Press SETtoconrmyourselection.

3. If “USR” was chosen, you will be asked to input your geographical coordinates.

Set Degree of Latitude:

Press UP or DOWN to adjust value. Press and hold either button for fast advance.

Press SETtoconrmyourselection.

4. Repeat above procedure to set minute of latitude, degree of longitude, minute of

longitude, time zone of the city, and DST selection.

5. Upon completion the display will be returned to Sunrise/Sunset Mode.

Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm

Mode. All settings made will be discarded.

Viewing the Location Data

In Sunrise/Sunset Mode, each press of SET rotates display between:

- Time and sunrise/ sunset Times

- Calendar and sunrise/ sunset Times

- Calendar and longitude/ latitude

Viewing Sunrise/Sunset Times for Different Dates

1. In Sunrise/Sunset Mode, press MEM or MEMORY.

2.Thedateshouldbeashing.

Press UP or DOWN to adjust date. Press and hold either button for fast advance.

The corresponding sunrise and sunset times will be displayed for the selected date.

3. Press MEM or MEMORY or SET to return display to Sunrise/Sunset Mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Irox PRO-X2 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Irox PRO-X2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info