Bedienungsanleitung Irox PRO-X2 (Seite 28 von 33) (Englisch)

578609

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Troubleshooting

The display shows dashes “---” for weather parameter(s)

The display will show “---” when the wireless link is lost with the remote sensor for the

following periods:

Thermo-hygro Sensor – 15 minutes

Anemometer (Solar cell wind sensor) – 15 minutes

Rain Sensor – 30 minutes

Check or replace the batteries for the corresponding sensor. Then press and hold DOWN

to enforce a search for all remote signals.

If the above does not solve the problem, check the wireless transmission path from the

corresponding sensor to the main console unit and change their locations if necessary.

Although wireless signals can pass through solid objects and walls, the sensor should

ideally be within the line of sight of the console unit.

The following may be the cause of reception problems:

- Distance between remote sensor and main console unit too long. (Maximum

transmission distance in open area conditions is 100m)

- Signal shielding materials such as metal surfaces, concrete walls or dense vegetation in

the path of transmission.

- Interferences from wireless devices (such as cordless phones, radio headsets, baby

listening devices) and electronic appliances.

The weather readings do not correlate with measurements from TV, radio or ofcial

weather reports.

Weather data can vary considerably due to different environmental conditions and

placement of weather sensors.

Check the placement tips included in this manual to site your sensors in the best possible way.

The weather forecast is inaccurate.

Theweatherforecastisapredictionofweatherafter12-24hours,andmaynotreect

current weather conditions.

PRECAUTIONS

This product is engineered to give you years of satisfactory service if you handle it

carefully. Here are a few precautions:

1. Do not immerse the unit in water.

2. Do not clean the unit with abrasive or corrosive materials. They may scratch the plastic

parts and corrode the electronic circuit.

3. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which

may result in malfunction, shorter electronic life span, damaged battery and distorted parts.

4. Do not tamper with the unit’s internal components. Doing so will invalidate the warranty

on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts.

5.Onlyusefreshbatteriesasspeciedintheuser’smanual.Donotmixnewandold

batteries as the old ones may leak.

6. Always read the user’s manual thoroughly before operating the unit.

CAUTION

- The content of this manual is subject to change without further notice.

- Due to printing limitation, the displays shown in this manual may differ from the actual

display.

- The contents of this manual may not be reproduced without the permission of the

manufacturer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Irox PRO-X2 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Irox PRO-X2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info