Bedienungsanleitung Isomac Kia (Seite 22 von 36) (Deutsch, Englisch, Italienisch)

669621

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

5 – FIRST USE OR REUSE

Follow carefully the instructions before using the machine.

• open the external packing and take the machine out. Inspect the

machine to ascertain that it is intact and in good condition. Check

for the presence of all the accessories supplied with the machine

(see paragraph 4)

• position the machine on a flat surface

• remove the cover and take out the water tank (2) (located inside

the machine) and rinse it

• fill the container with clean water, return it to its housing and

insert the silicon tubes. Close the cover on the machine

WARNING ! Before making the electric connection,

make sure that the main power voltage corresponds

to the specifications indicated on the data plate placed

under the base of the machine.

Press the main power switch (1); the pilot light (14) will be

switched on.

The automatic level indicator will start filling the boiler with water

until it automatically reaches the prescribed level; the boiler water

level is automatically checked and the prescribed level will be

automatically refilled.

Then wait until the machine reaches the 1.1 – 1.3 bar operating

pressure, by checking the boiler pressure on the pressure gauge

(2) MONDIALE E MONDIALE PID.

The machines with the termopid (18) will visualize the degrees

inside the boiler and will control the boiler’s heating.

The termopid is already set from the producer on 122°c (about

1,2 bar), the ideal temperature for a good cup of coffee. (If you

want to change the pid’s temperature, please follow the instructions

written under how to set the temperature inside the boiler by means

of the pid).

When the display of termopid see the set temperature and then

and 'the pressure has been reached, the machine' ready for use.

The machine with a basin built-in is provided with a safety device

controlling the amount of water contained in the basin itself; when

the water level reaches a capacity of approximately 0.5 litres, the

device automatically stops all the machine functions.

The red warning light (15), located on the user side of the panel,

switches on to indicate that the water is missing in the water tank.

As it is filled up, the warning light switches off and the machine is

ready again to deliver coffee.

Fill the filter holder (12) with the brewing group (11)

Thanks to the working of the lever group (20), brew some water to

avoid the correct refilling of the coffee exchanger.

WARNING ! The coffee brewing and the power supply

of the heating element don’t work when the water

tank lamp (15) is on.

During start-up: when the boiler pressure gauge (5) shows a

pressure of approximately 0.5 bar, open slowly the steam tap

handle (7), to discharge the air contained in the boiler, and wait

until steam starts flowing out of the steam supply nozzle (10), then

close it.

Wait for the reaching of the pressure and the correct thermic balan-

ce, after 10 – 15 minutes.

5.1 – ZAFFIRO MODEL

Switch on the machine setting the switch on/off (1) on the position

“I”. The lighting of the lamp (14) confirms the electric feeding.

Fill the filter holder (12) with the brewing group (11).

Put a tank under the water/steam jet (24).

Open the hot water/steam handle (23). Put the lever to supply hot

water (21) on the position “I”.

When the water comes out from the steam jet spout, put the switch

lever to supply hot water (21) on the position “O” and close the

handle(23). These operations are useful to effect the right refilling

of the boiler.

e) Using the lever of the brewing group (20) make a water supply

to avoid the right refilling of the coffee circuit.

WARNING ! The coffee supply and the heating feeding

don’t work when the water tank lamp (15) is on.

The machine with a basin built-in is provided with a safety device

controlling the amount of water contained in the basin itself; when

the water level reaches a capacity of approximately 0.5 litres, the

device automatically stops all the machine functions.

The red warning light (15), located on the user side of the panel,

switches on to indicate that the water is missing in the water tank.

As it is filled up, the warning light switches off and the machine is

ready again to deliver coffee.

To ensure proper operation of the safety device, avoid placing

cups or other items on the tank lid (2).

N.B. : the warning light of the reaching of the right

temperature will continue to go out and to light up

automatically during the heating period.

After doing these operations, wait that the machine builds up the

operating temperature to make coffee, lamp (17) off.

5.2 PRESSURE SWITCH REGULATION (ONLY KIA MODEL)

The pressure switch shown in the picture has to keep the pressure

in the boiler constant, by activating or deactivating the electrical

heating element.

This pressure switch is adjusted during the final testing of the

machine on a 1.1÷1.3 bar value; however, if the specific case

requires a different operating pressure, the pressure switch ope-

rating range can be changed by operating on the regulation

screw (U): by reducing the pressure, you will obtain a temperature

reduction, by increasing the pressure, the water temperature also

increases.

The regulation sense is shown in the picture and also on the pres-

sure switch itself. The pressure changes approximately 0.1 atm for

each complete turn of the screw.

Isomac Kia Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info