669624
25
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
25
English
11 – USER INSTRUCTIONS
11.1 – STARTING THE MACHINE
VERSION VNS
a) Fill the tank (1) with cold water.
b) Switch the machine on by pushing the on/off lever (13) on the position “I”. The lamp (13a) comes on to
confirm the power supply.
c) Insert the filter holder (8) in the coffee group (5).
d) Open the steam/hot water knob (4).
Place the coffee water lever and the steam lever (15) on the position “I”. Should water comes out of the turbo
steam supply nozzle (6), push the coffee lever and the steam lever (15) on the position “0” and close the knob (4).
e) Please, check the tank water (1) level so to prevent from repeating these operations and from empting water
circuit. In case it happens, repeat all the above mentioned operations by all means.
f) After doing these operations, wait that the machine builds up the operating temperature to make coffee, lamp
(14a) off.
N.B. The lamp reached the correct temperature (14a) will continue to go out and to turn on
automatically during the heating period. After turning on the machine, for the first coffee,
wait about 20 minutes for the ideal heating, while for all subsequent machine will always
be ready.
VERSION VNSPID
a) Fill the tank (1) with cold water.
b) Switch the machine on by pushing the on/off lever (13) on the position “I”. The lamp (13a) comes on to
confirm the power supply.
c) Insert the filter holder (8) in the coffee group (5).
d) Open the steam/hot water knob (4).
Place the coffee water lever and the steam lever (15) on the position “I”.
Should water comes out of the turbo steam supply nozzle (6), push the coffee lever and the steam lever (15) on
the position “0” and close the knob (4).
e) Please, check the tank water (1) level so to prevent from repeating these operations and from empting water
circuit. In case it happens, repeat all the above mentioned operations by all means.
After completing all these operations, leave the machine on.
The Termopid (11) will visualize the degrees inside the boiler and will control the boiler’s heating.
The PID is already set from the producer on 92°C, i.e. the ideal temperature for a good cup of coffee. (If you
want to change the Termopid’s temperature, please follow the instructions written under How to set the temperature
inside the boiler by means of the Termopid).
As soon as the Termopid’s display shows the set temperature and the indicator light (14a) remains on, it is
confirmed that the water in the boiler has reached the set temperature
N.B. The lamp reached the correct temperature (14a) will continue to go out and to turn on
automatically during the heating period. After turning on the machine, for the first coffee,
wait about 20 minutes for the ideal heating, while for all subsequent machine will always
be ready.
SERIE VNSPID
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Isomac Venus II wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info