A
! g. 2
! g. 3
! g. 5
A
G
A
! g. 1 ! g. 2
H
! g. 4
I
INSTALLATION
SMOKE OUTPUT
CLASSICA is designed for the connection of the • ue at the
top, back of the stove.
Illustration 1 shows how the stove will appear once it has been
unpacked.
To connect the • ue from the back it is necessary to remove the
elbow junction
To connect the smoke outlet at the top of the stove, proceed as
follows:
Remove the cast iron top (a – • g. 2)
Fit the elbow connection to the smoke extractor unit vent (G -
• g. 3) with the band provided.
AFTER COMPLETING THE CONNECTION OF THE
SMOKE OUTPUT PIPE TO THE FLUE, FIT THE CERA-
MIC SIDE PANELS AS SHOWN ON THE FOLLOWING
PAGE.
Remove the left cast iron from the top (H-Fig.4) replacing it
by the • ue cover (I-• g.4) provided, to allow the passage of the
pipe.
Before replacing the cast iron top (A – Fig. 5) removed
previously, apply the ceramic covering as illustrated on the
following page.