Bedienungsanleitung ITT BIG 300 (Seite 4 von 25) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

567077

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

2.5 SET Flash/P-T /illegal dialing prevention

When LCD displays Press 5 to enter Flash time/P-T/ Anti-parallel

setting. Then LCD will display

1 Press “1” to enter ash time setting, LCD shows (the default value

is 600ms),

is twinkling, press “UP” or “DOWN” to set the desired time. There are 8

choices: 90, 95,100,120,180,300,600 and 1000ms.

2 Press “2” to enter P-T switch mode and the LCD prompt

The .default setting is TONE.

is twinkling, press “UP” or “DOWN” to toggle from

TONE to PULSE.

3 Press “3” to enter illegal dialing prevention setting. LCD shows

is twinkling, then press “UP” or “DOWN” to toggle from OFF to ON.

During each step, press “FLASH/SET” to conrm and

to exit.

2.6 SET Local area code/ Out area code

When LCD displays Press 6 to enter local area code and out area

code setting. Then LCD will display

1. Press “1” to enter local area code setting. LCD shows ,

“

” is twinkling, Input numbers directly. There are 8 digits number can be

stored.

2. Press “2” to enter out area code setting.LCD prompts

is twinkling, directly to input number to activate this function while its default setting

is OFF. There are 8 digits number can be stored.

3. During each step, press “FLASH/SET” to conrm and to exit.

2.7 LCD brightness adjustable

When LCD displays Press 7 to enter LCD contrast setting. Then LCD

will display “ LCD Con 4”, “4” is twinkling, press “UP+” or “DOWN-” to adjust the LCD

brightness (Total 5 levels). 1 is the darkest and 5 is the brightest. The default value is 4.

Press “FLASH/SET” to save the setting and

to exit.

Remark: When LCD display becomes weaker, please change the batteries by new ones.

2.8 SET IP

When LCD displays Press 8 to enter IP setting.

Then LCD will display

1 Press “1” to enter the auto-IP code setting, on LCD with

blinking. Press “UP+” or “DOWN-” to choose the desired IP number and press SET to

conrm. The following numbers for selection:

IP1, IP2, 17909, 17908, 193, 17911, 17921, 17931, 17951, 17991, 068, 96300, 96333, 196,

190, 17969, 197.

2 Press “2” to enter setting the IP number manually. LCD displays

directly

input the new IP number and press DEL to modify, press “FLASH/SET” nally to save.

3 Press “3” to enter the second Manual IP setting, setting procedure please refer to the rst

one.

Press “FLASH/SET” to save the setting and

to exit.

3. On-hook Operation

3.1 Reviewing the incoming calls

At On-hook status or off-hook status, press “UP+” or “DOWN-” to review all the incoming

call numbers, press “#” key for 3 seconds also can go into the incoming inquiry state.

3.2 Call back

When viewing incoming or outgoing calls, nd the desired number, press “BACK/÷” to call

back directly. Holding “BACK/÷” key for 3 seconds phone will auto-add 0 before the number

you want to call back.

3.3 Reviewing the outgoing calls

At On-hook status or off-hook status, press “CHECK/×” to review the outgoing calls, using

“UP+” or “DOWN-” to backward or upward review the number, date and time of outgoing

calls.When on-hook state, pressing “*” for 3 seconds also can go into the outgoing inquiry

state.

3.4 Pre-dialing function

At on-hook state, you can input the calling number directly (edit the mistake with the DEL

key), then press BACK/÷ or

key to dial out.

3.5 DEL function

During the setting model, using DEL key to exit. In pre-dialing, use DEL key to delete the

wrong numbers. During the review of incoming, outgoing & stored numbers, use DEL key to

delete the certain number. If hold DEL key for 3 seconds, all the incoming & outgoing calls

will be deleted.

BIG 300 User manual 11x15_8giu.indd 6-7 13/06/12 11.26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ITT BIG 300 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info