7
2. Remove the battery (see Removing Battery).
3. Place SIM cad into the SIM holder.
4. Fit the battery with the metallic contacts at the right bottom
comer.
5. Replace the back cover by fitting it to the back of the phone.
2. Install Battery
(1)Connect the battery’s metal touch points separately with the
battery compartment metal touch points, and enter the battery
base to the slot.
(2) Slide the back cover toward the top of the phone to lock the
cover into its place.
3. Remove Battery
Remove the back cover then push toward the bottom of the
phone and lift the battery at the at the top side center to remove.
! Settings and data stored in the phone or SIM card may be
lost after the battery is removed.
4. Charge Battery
Connect the charger to power supply, and then insert the
charger pin into the I/O jack.
Note:
1. When charging, DO NOT removes or takes out the battery
to avoid the battery circuit to burn out.
2. While charging, it is normal that the phone and charger will
become hot.
3. If the battery is completely empty, it may take a period of
time before the charging icon appears on the display.
5. USB Management
When USB cable plugged in, the USB charger function will
startup. If there is a memory card inside the phone, the popup
dialog box will ask you reboot the phone to used as a USB Flash
Disk or not.
6. Power on and off
Press and hold Power key to turn on/off the phone.
And if you have set PIN or phone code, input it correctly.
