3.2 Power on Your Easy5
Press and hold the power key until the indicator LED lights•and the
switch-on ring tone will play. After searching and registering the
network successfully, the LED will continue to flash as per 1.7. If
there is no SIM card in the handset, the LED will keep flashing to
indicate there is no network available.
e.
rovider.
is complete.
ll:
as ‘1SON’ in the SIM card)
d.
NOT.
Before powering on, please ensure you have read 3.9 regarding the
Easy5 and SIM PIN cod
If the SIM card is in the handset but the LED flashes continuously
when the handset is powered on, your SIM card is blocked and you
may need to contact your Service P
3.3 Power Off your Easy5
Press and hold the power key until the indicator LED lights up and
you will hear a beep. The LED will go off when the power down
procedure
3.4 Making a Call
There are two way to make a ca
1. When the handset is in standby mode, long press (press 3
seconds) the numeric key to dial the phone number stored in the
SIM card. (For example, long press numeric key 1 to dial the
number saved
2. Or short press the numeric key, then press the call key within 5
seconds to dial the phone number stored in the SIM car
EMERGENCY CALL: WHEN THE HANDSET IS POWERED
ON, YOU CAN DIAL THE EMERGENCY NUMBER BY LONG
PRESSING THE CALL KEY, WHETHER THE SIM CARD IS
IN THE HANDSET OR
3.5 Incoming Calls
5
