Bedienungsanleitung ITT Mini Dual (Seite 15 von 40) (Englisch)

457271

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

If current switch-on mode is set to be “double cards are started” or “only card 2 is started”, when the phone has checked

automatically that SIM2 is usable, the following prompts will appear on the display screen in sequence:

6> “Input PIN of card 2” – if you have started the SIM lock of card 2.

7> “No service” – indicates failed registration of network for card 2 and you can’t call at the moment.

8> “Emergency call is allowed” – indicates that card 2 is registered to other network and only 112 can be dialed.

9> “Search” –card 2 is searching network until proper service network is found.

Note:

Please contact your network operator if you don’t know the PIN1 code of card 1 or card 2.

The default phone password is “1122”.

5.2 Switch off the phone

If you need to switch off your phone, please press the On/Off key until switch-off animation is displayed in the screen. Then

card 1 and card 2 will be closed together. Please don’t switch off your phone by taking down the battery directly, or SIM cards may

be damaged easily and also you may lose some information.

5.3 Shortcut function in standby state

Shortcut icons on the screen from left to right are network service, short message, shortcut, phone book and dial keypad.

5.4 Dial call

 Input phone number on screen dial interface. Press Call Key of card 1 and you can dial call through card 1. Press Call

Key of card 2 and you can dial call through card 2. Please press [clear] key or [On/Off] key if you need to end or cancel the dialing.

When the telephone gets through, you can see

 Dial call with phone book: enter and search name/phone number stored in phone book. Press Call Key of card 1 and you

can dial call through card 1. Press Call Key of card 2 and you can dial call through card 2.

call timer on the screen.

 Redial numbers dialed recently: in standby state, press Call Key of card 1 or card 2 and you can look over 40 numbers or

names you called recently. Scroll to the number or name you need and press Call Key of card 1 or card 2 to make a call.

5.5 Adjust volume of receiver

You can press up and down key of the phone to adjust volume of receiver during communication.

5.6 Answer call

The phone will prompt you by the way you have set for incoming calls, including ringing, vibration, vibration & ringing and

ringing after vibration, if any call is dialed in.

Press dial/call key of either card 1 or card 2 if you want to answer incoming call.

Press On/Off key or end key or click [reject] in the lower right corner if you need to reject call,

If you have applied calling identification service, calling number will appear on the screen when a call is incoming. If the

number has been stored in phone book, then corresponding name will be displayed in the screen.

If card 1 is called, “SIM1” will be marked before incoming call number or name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ITT Mini Dual Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ITT Mini Dual

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info