Bedienungsanleitung ITT Outlimits K2 (Seite 14 von 20) (Englisch)

515017

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

26 27

4.1.4 Bluetooth

- Power: Activate/deactivate Bluetooth.

- Visibility: Set the visibility of Bluetooth device.

- My device: Display device model when connected.

- Search audio device: Display the model of online device.

- My name: Edit the Bluetooth device’s name.

- Advanced: Setting the parameters when Bluetooth is connected.

• Audio path: Set voice to the phone or to handsfree device.

• Storage: Set the path of transmission.

• Sharing permission: Set the permission as only reading or full control.

• My address: Display the information of the Bluetooth device.

4.1.5 Restore Factory Settings

You can restore some settings of the phone to factory settings. To restore the factory settings, enter the password.

The default password is “1122”.

4.2 Sound setting

You can set one of the following options:

• Tone settings: To set the tone for incoming calls of SIM card 1/2, alarm, power-on (except Bluetooth mode),

power-off, messages of SIM card 1/2 and key press.

• Volume: To set the volume of ring tone and key tone.

Name Description

Network selection

New Search: To search the network again.

Select network: The phone only load the appointing network. When the network can’t

work, the phone won’t register other network

Search mode: Automatic/Manual.

Preferences To select the preferred network.

• Alert type: Includes Ring, Vibrate, Vibrate and Ring, Vibrate then Ring

• Ring type: To set the ring type, including Single, Repeated and Ascending.

• Extra tone: Includes four types, Warning, Error, Camp-on, and Connect.

• Answer mode: You can choose the answer mode as Cover answer or Any key.

4.3 Display

• Wallpaper: Set the background picture in standby screen interface

• Screen saver: Set Standby on / off screen, and start the waiting time.

• Power on display: Select the system picture and user dened picture as your power on display.

• Power off display: Select the system picture and user dened picture as your power off display.

• Show date and time: Enable/disable to display the date and time.

• Show owner number: Enable/disable to display the owner number.

4.4 Call settings

4.4.1 SIM1/SIM2 call settings:

- Caller ID: Includes Set by Network, Hide ID, and Send ID.

• Set by networ: The number of the phone will be sent as per the default mode when a call is initiated.

• Hide ID: The number of the phone will not be sent when a call is initiated. If the system doesn’t support this

function, it may not make a call.

• Send ID: The number of the phone will be sent when a call is initiated.

Note: This function requires the network support. For details, please contact the network operator.

- Call waiting: To set functions like activate/deactivate and enquiry call waiting. During call holding and

making multi-party calls, this function should be activated rst, and network support is required for the specic

implementation of the function.

- Call divert: It is a network function that can only be used when you apply for this service of the network operator.

The function can divert calls that satisfy the conditions to the other caller’s phone number you have designated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ITT Outlimits K2 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ITT Outlimits K2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info