Bedienungsanleitung Jablocom EYE-02 (Seite 12 von 148) (Deutsch, Englisch, Französisch, Spanisch, Norwegisch, Finnisch)

607100

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

EYE-02.ENG.MAN.User_Manual.23.C

- 10 -

• Report levels

Each stored contact can have its own report level set. Three levels

(Normal, Extended, All Details) indicate how many events are

reported to the contact.

The extended level of reporting is assigned only to the rst enrolled

contact, all additional contacts are set to normal level.

REPORT LEVELS ALARMS PROBLEMS

STATUS

CHANGES

NORMAL

_ _

EXTENDED

ALL DETAILS

The EYE-02 camera can also report all events to Alarm Receiving Centre run by a security agency. Reports are

created in accordance with international standard communication protocols. Protocol settings will be made by the

authorized ARC service provider once you subscribe to their service.

• Report format

By default, the camera sends an alarm report as an MMS and makes a call to all enrolled contacts. For normal opera-

tion there must be minimum of 1 contact enrolled in the camera.

• Editing contacts

The easiest way of editing contacts is via the JabloTool software. For remote editing of contacts, use the JabloTool

web interface and create account on www.jablotool.com. JabloTool allows you to simply edit the numbers or e-mail

ad-dresses and completely customise what events will be reported at which reporting level.

Alternatively, new telephone contact can be added by calling the EYE-02 camera from the telephone number you

wish to add while the camera is in the ENROLL mode. New contacts can also be added via an SMS command (see

chapter 4.3)

The camera sends e-mails with the reply address noreply@eye-02.info. Please change your e-mail

client SPAM lter to accept e-mails from this address.

Think about who should be sent the alarm information. In the case of remote location, it is useful to

add someone who is physically close to the camera (neighbours, security agency etc.).

3.8 Security settings

It is possible to use two passwords to protect your camera. To set or change the passwords, use JabloTool or SMS

commands (chapter 4.3).

If a password is not used, the camera processes incoming SMS messages only from phone numbers stored in

contacts. Camera always receives calls only from telephone numbers stored in its contact list. (See chapter 4.4. Call

Control)

• Remote Access Password

This password protects you against any unahthorized access to your camera (SMS, JabloTool). It is set to 0000

by default.

If it is used, the camera only processes SMS messages that begin with the password from any phone number.

• Conguration Password

This password protects the camera conguration. (The contacts are not part of the conguration.) This password is

not set by default.

If it is used, the camera only processes SMS messages that begin with the password from any phone number.

The passwords can contain 4-31 characters; the permitted symbols are 0..9, a..z, A..Z. The

passwords are not case sensitive. You can also use JabloTool web interface on www.jablotool.com to

congure your passwords.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablocom EYE-02 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info