Bedienungsanleitung Jablotron CMD6129S Tiny (Seite 7 von 9) (Englisch)

554993

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

2524

ENEN

MZZ56200MZZ56200

ACCESSING MENU OPTIONS OF THE RECEIVER

Press the MENU button on the receiver to enter the menu options. Use the navigating arrows to move

up/down/left/right in the menu, and press the OK button to conrm a selection.

Main Menu

The Main Menu contains 4 submenus:

1. PAIRING – For adding more cameras to the receiver.

NOTE: This option is not available for the Tiny monitor.

2. EV – Adjusts the exposure level of the camera.

3. POWER SAVING – Turns on the receiver

power save mode (when no activity on the camera is

detected, the LCD screen on receiver will switch off).

4. SETTING – Sets the AV output options and

resets the receiver to factory defaults (erases all

congurations).

Pairing Submenu

Function not available for Tiny monitor. The system

comes with a single camera that has already been

paired. When you switch on the receiver and the

camera, you are able to see the video immediately.

ADjUSTING THE RECEIVER VOLUME

The receiver volume can be adjusted by using the

UP/DOWN arrows   while watching the video.

Press the DOWN arrow  to decrease the volume

and the UP arrow  to increase the volume. When

the volume is set to one bar (lowest setting), the

volume is muted.

The volume strength indicator is shown on

display while the volume is being adjusted and will

disappear 10 seconds after nal setting.

EV Menu

The EV Menu is used to adjust the exposure of the camera.

Use the LEFT and RIGHT  arrows to change the bar from darkest (left) to lightest (right). Press the

OK button to accept the setting.

Power Saving Submenu

The Power Saving Menu is used to turn off the LCD

screen at a preset time to save the battery. This

function can be set from 1 minute to up to 10 minutes.

The Cancel option switches this feature off.

When the Power Saving option is on, the LCD screen

would only be switched on by activation by the preset

volume level or by pushing any button on the front

of the receiver.

When the LCD screen is activated by button

pushing, it will turn back to Power Saving mode

after the preset time expires. If it is activated by

sound in the monitored area, it will go back to

a black screen after 5 seconds.

Setting Submenu

The Setting Menu contains 2 submenus:

1. A/V Out – Changes the quality of the image sent

to the A/V receiving device (i.e. TV or monitor).

2. Default – Resets all menu settings to the factory

defaults.

A/V Out Menu

The A/V Out menu option is used to adjust the

resolution quality of the image for TV, monitor etc.

Use the UP  and DOWN  arrows to select a

resolution, and press OK to accept your option.

NOTE: It is strongly recommended to use the “High”

resolution to ensure the best image resolution

on a large screen (default setting).

Default Menu

The Default option is used to reset the receiver to

factory settings – all menu settings will be reset.

Use the UP  and DOWN  arrows to select YES,

and press OK to accept.

NOTE: Camera pairing will NOT be affected by a

reset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron CMD6129S Tiny Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info