Bedienungsanleitung Jablotron GD-06 (Seite 2 von 2) (Englisch)

554883

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

GD-06 ALLEGRO GSM dealer 2/2 MHG51302

3.3. Customization of SMS texts and access

codes

The default texts of reporting SMS and incoming SMS

instruction can be modified using the following programming

SMS:

MASTER TXT index, text

index index number according to the following

table

text new text, which will be used in SMS

messages

Basic SMS reports’ texts

Index Default Description

10 P1 Description of P1 input terminal

11 On P1 input terminal is triggered

20 P2 Description of P2 input terminal

21 On P2 input terminal is triggered

30 P3 Description of P3 input terminal

31 On P3 input terminal is triggered

40 P4 Description of P4 input terminal

41 On P4 input terminal is triggered

Basic SMS instructions’ texts

Index Default Description

50 P5 Description of P5 output terminal

60 P6 Description of P6 output terminal

70 RELAY Description of the relay output

100 ON Instruction to switch on an output

101 OFF Instruction to switch off an output

109 USER User access code

110 MASTER Master access code

You can send multiple texts separated by commas and blank

spaces in one programming SMS.

Examples:

a) “MASTER TXT 10, Security system, 11, armed” will

customize the input P1 setting to indicate a security

system’s status. If a corresponding alarm system

output triggers the P1 when arming, then SMS

report “Security system armed” is sent.

b) “MASTER TXT 71, Heating” will modify the remote

SMS instruction to switch on a heating system

connected with the relay output to “Heating on”.

c) “MASTER TXT 110, Big elephant” will change the

master access code to “Big elephant”

4. Operation

After installation of the GD-06 ALLEGRO and programming

of the telephone numbers, the GD-06 is ready for operation.

• Triggering of any input P1 to P4 will cause the sending

of a SMS report to the telephones registered in the

positions TEL1 to TEL6.

• From a GSM phone, you can send an SMS instruction

to switch on or off the P5 and P6 outputs.

• You can also switch the relay on or off by making a

phone call to the GD-06 from a phone registered to

TEL1 or TEL2 memory positions. The GD-06 ALLEGRO

doesn’t answer this call, so you don’t pay any

telecommunication fee for this remote control.

Notes:

1. You can remotely control the GD-06 from any phone:

not only from the ones stored in the memory TEL1-

TEL6. You just have to add the master (default

MASTER) or user (default USER) access code in front

of the instruction.

Example: “MASTER ON P5”

2. The SMS instructions texts are case insensitive. It

means that instruction “ON P5” is equal to “on p5”.

5. Advanced programming

More detailed programming can be accomplished from

Internet using the web page www.gsmlink.cz

. Follow the

product registration instructions to get access to a secure

web page. Use the registration code printed on the warranty

certificate (the code has a form xxxx-xxxxx-xxxx and it is

unique for each system). From the GSMLink, you can

program your GD-06 ALLEGRO easily regardless of where

in the world you are located. The best performance will be

obtained if your SIM card enables GPRS data transmission.

Form the GSMLink server you can:

• Check the current status of all inputs and outputs

• Control the outputs

• Program the GD-06

• Change the SMS tetxts (only when GPRS data

connection is enabled)

If you don’t have Internet access, you can also use SMS for

the advanced programming. You can find all details in the

Expert programming manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron GD-06 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablotron GD-06

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info