Bedienungsanleitung Jablotron JA-80BT (Seite 2 von 2) (Englisch)

554849

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Bluetooth adapter JA-80BT 2 / 2 MHY51900

The JA-80BT Bluetooth adapter

The JA-80BT Bluetooth adapter (interface) allows you to establish a wireless

connection between systems of the JA-8x series or the JA-6x series and PCs

equipped with Bluetooth connectivity. You can connect the adapter to the control

panel’s digital bus connector via an RJ cable supplied with the package. The

computer is assumed to have all the hardware/software installed necessary for

Bluetooth communication.

Pairing the adapter

1. Connect the JA-80BT to the control panel’s digital system bus. After being

connected, the device will initialise for about 15 seconds which is indicated by blue

LED flashing. (The LED stops flashing as soon as the initialisation period ends.)

2. Start a search for BT devices using the Bluetooth driver program running on your

PC. To do so, follow the driver’s instructions *.

3. After a “JA-80BT” device has been discovered, click the “Pairing” button. A dialog

box should appear which prompts you to type in a code – a connection security

code. Key-in the four digit PIN number which is printed on the label attached to the

JA-80BT adapter.

4. After the devices have been paired a virtual COM port (e.g. COM5) is created on

the computer. This port is accessible to the ComLink software.

5. On start-up, the ComLink application scans through all existing computer ports. If

an active JA-80BT COM port is found, ComLink starts to communicate via this

port. This communication is indicated on the JA-80BT by a blue LED being

constantly lit.

6. Exiting the ComLink application or switching to Offline mode will end

communication and turn the blue LED off.

*Note: The pairing routine may vary depending on the drivers installed on your PC.

Specifications

Connector RJ-4

Power supply from the digital bus

Consumption (standby / maximum) 6 mA / 25 mA

Control panel connection cable length 1 m

Built-in decoder data conversion of JA-8x/6x to Bluetooth

Compatibility ComLink version 60 and higher

FCC ID VL6JA80BT

Jablotron Ltd. hereby declares that the JA-80E is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC and complies with part 15 of the FCC rules.

Operation is subject to the following two conditions: 1. This device may not cause harmful

interference, and 2. This device must accept any interference received, including interference that may cause

undesired operation.

CAUTION: Changes or modifications no expressly approved by Jablotron could void the user´s

authority to operate the equipment. The original of the conformity assessment can be found at

www.jablotron.com

, Technical Support section.

Note: Although this product does not contain any harmful materials we suggest you return

the product to the dealer or directly to the producer after use.