5
English
Jabra BT205 is ready to wear on the right ear. If you prefer the left, gently rotate the
MiniGel 180°.
For optimal performance, wear Jabra BT205 and your Bluetooth phone on the same
side of your body. In general, you will get better performance when there are no
obstructions (including parts of your body) between the headset and the phone.
(see Fig. 4)
If Jabra BT205 is off, turn it on now (see Turning headset on/off section).
Using phone’s keypad
1. Dial number on keypad.
2. Press phone’s “send” key.
Using voice-activated dialing (after you’ve set up voice tags on your phone)
1. Press and release once. You’ll hear
1 short beep while doing this.
2. You’ll then hear the voice-activation tone; say the name of the person you wish to call.
NOTE: Record voice tag from headset for better reception.
•
Press and release once.
OR
•
End call from phone’s keypad.
Choosing wearing preference
6
Making a call
7
Ending a call
8
•
After you hear the ring tone, press and release once.
OR
•
Answer the call with your phone’s keypad. You may then need to transfer the call to
the headset by pressing and releasing once (depending on your phone).
Answering a call
9
4
BASIC OPERATIONS
English
IMPORTANT: Do not hold the button down for more than 3 to 5 seconds when
turning the headset on or else it may go into pairing mode, and the blue indicator light
will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat
process for turning the headset on.
Status indicators
What you hear
Quick series of 2 tones
– low to high pitch (when
active mode starts)
Quick series of
2 tones
– high to low pitch (when
standby mode starts)
3 beeps every 30 seconds
3 beeps every 5 minutes
Status
Active Mode⁵
•
Call in progress
•
Up to 3 hours of talk time*
Standby Mode
⁶
•
Waiting for call
•
Up to 100 hours of
standby time*
Low Battery (in active mode)
•
3 – 5 minutes of talk time left
Low Battery (in standby mode)
•
3 – 5 minutes of talk time left
What you see
Flashes every
second
Flashes every
3 seconds
3 flashes every
second
3 flashes every
3 seconds
What you do
Press and hold for 3 to
5 seconds until you see a
burst of flashes on the blue
indicator light, then release
Press and hold
for 3 to
5 seconds until you see a
burst of flashes on the blue
indicator light, then release
What you hear
Ascending
(low-to-high)
tones
Descending
(high-to-low)
tones
Turning
headset on
Turning
headset off
What you see
The blue indicator
light will flash while
the power is on
(see
Status indicators
table below)
The blue indicator
light will stop
flashing
* Depending on phone type and usage.
Turning headset on/off
5
