Bedienungsanleitung Jabra bt 250 (Seite 4 von 27) (Englisch, Französisch, Spanisch)

227974

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

WARNING: Do not attempt to charge Jabra BT250v with anything other than the AC

adaptor provided. Using another AC adaptor may damage or destroy the headset.

IMPORTANT: The blue indicator light will be on while charging and will turn off

when charging is complete. Removing the headset from the charging cradle while it’s

charging will put the headset into standby mode and stop the charging sequence.

IMPORTANT: Jabra BT250v cannot be used while charging.

Read the glossary

Read the glossary at the end of this document to familiarize yourself with important

terms used in this User Manual.

Once Jabra BT250v is fully charged, continue with these instructions.

Pairing³ will create a unique and encrypted wireless link between two Bluetooth

enabled devices such as your Bluetooth phone and Jabra BT250v.

1. Ensure the headset is off

(see Turning headset on/off

section)

2. Press and hold until you see a

solid blue light

(approximately 8 seconds), then release* (see Fig. 2)

3. Set your Bluetooth phone to “discover” the headset

by following your phone’s instruction guide. Typically,

the steps involve going to a “setup,” “connect,” or

“Bluetooth” menu on your phone and then selecting

the option to “discover” a Bluetooth device.

4. Your phone will find the “Jabra BT250v” headset and

ask if you want to pair with it. Confirm this by pressing

“yes” or “ok."

5. Enter passkey or PIN

⁴ = 0000 (4 zeros), then press “yes” or “ok."

IMPORTANT: If pairing was successful, the blue indicator light will briefly flash rapidly

before going back to flashing every 3 seconds. If unsuccessful, the light remains solid,

and you’ll need to reattempt pairing (see steps 3–5 above).

“Pair” to your Bluetooth phone

Fig. 2

Fig. 3

* If you have a Bluetooth phone that supports the hands-free Bluetooth profile,

see Enhanced features section for alternative pairing instructions. Phone-

specific pairing instructions can be found online at www.jabra.com

The Jabra BT250v has a unique call alert feature that vibrates to inform you that you are

receiving a call. The vibrate function is enabled when you first turn on Jabra BT250v.

If you turn on the device in the usual way without touching the volume button, the

vibrate function will remain enabled.

1. To turn off the vibrate, hold the volume down button while you turn the headset on.

2. If you wish to re-activate the vibrate, hold the volume up button while you turn the

headset on.

Turning on/off call alert vibrate

Turning headset on/off

BASIC OPERATIONS

What you do

Press and hold for 3 to

5 seconds until you see a

burst of flashes on the blue

indicator light, then release

Press and hold

for 3 to

5 seconds until you see a

burst of flashes on the blue

indicator light, then release

What you hear

Ascending

(low-to-high)

tones

Descending

(high-to-low)

tones

Turning

headset on

Turning

headset off

What you see

The blue indicator

light will flash while

the power is on

(see

Status indicators table

below)

The blue indicator light

will stop flashing

4 5

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jabra bt 250 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info