Bedienungsanleitung Jabra bt 800 (Seite 4 von 23) (Englisch, Französisch, Spanisch)

227742

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Basic usage of your Jabra BT800 headset

The operation of the basic features in the headset is very similar to your mobile phone.

1. To answer a call

•

You answer the call directly on the headset with a tap on the answer button.

A simple tap on the headset’s answer button will capture and transfer the call

to the headset

2. To end a call

•

A tap on the end button terminates the active call

•

You can also reject an incoming call directly from the headset. Press the end

button and the call will be rejected. Depending on the phone settings, the person

who called you will either be forwarded to your voice mail or hear a busy signal

3. To make a call

•

If you make a call from the mobile phone, the call will (subject to phone settings)

be automatically transferred to the headset

•

Voice dialing is activated with a tap on the answer button. For further information

about using this feature, please consult your phone’s user manual. You will get the

best results if you record the voice-dialing tag through your headset

•

Activate last number redial with a press on the answer button on the headset

Charge the Jabra BT800

Fig. 2

Use the AC adaptor to charge the Jabra BT800

from a power socket. You can also charge the

headset direct from your PC using the USB

cable provided. The headset is connected to the

AC adaptor as shown in Fig. 2

Pair (connect) with your Bluetooth headset

Before you get started, you need to pair

the Jabra BT800 with your mobile phone.

1. Switch the Jabra BT800 on

Turn on the headset by pressing the on/off button.

2. Put the headset in pairing mode

Put your headset in pairing mode with a press on the stylus switch marked ( ). Or

put the headset in pairing mode from the display menu. – see Section 4 for details.

The blue LED at the centre of the jog wheel (mute button) goes solid blue when the

headset is in pairing mode.

3. Set your Bluetooth phone to “discover” the Jabra BT800

Follow your phone’s instruction guide. This usually involves going to a “setup”, “connect”,

or “Bluetooth” menu on your phone and then selecting the option to “discover” or

“add” a Bluetooth device*. (See example from a Sony Ericsson T610 in Fig. 3)

Fig. 3

* Phone-specific pairing instructions can be found online at www.jabra.com

NOTE: Your headset can store pairing information on up to 8 devices. Once the headset

has registered 8 devices, new pairing information will overwrite those that haven’t been

used recently.

Fig. 4

Answer Button

End & On/Off Button

English

The Jabra BT800 is designed to be simple to

operate with a minimum of control buttons.

The answer and end buttons on the headset

will provide alternative operations depending

on the length of time they are pressed.

Instruction: Duration of press:

Tap Press briefly

Press Approx: 1 second

Press and hold Approx: 5 seconds

4. Your phone will find the “Jabra BT800”

The phone then asks if you want to pair with it. Accept the pairing by pressing “Yes”

or “Ok” on the phone and confirm with the passkey or PIN⁴ = 0000 (4 zeros)

The phone will confirm when pairing is completed. In case of unsuccessful pairing,

go through the steps from 1-4 again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jabra bt 800 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info