Bedienungsanleitung Jabra gn 9330 (Seite 12 von 47) (Englisch)

230172

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

GN9350e

GN9330e

GN9330e USB

4.6 Switching a call from desk telephone handset to headset

It’s possible to switch a call in progress from the telephone’s handset to the headset:

1. Remove the headset from base, or if already out, press the headset’s talk button.

This establishes a link.

–> The headset’s link indicator will start ﬂashing and the call will be switched to the headset.

Note: Do not place handset before the call is over, as this will end the call.

GN9350e

GN9330e

GN9330e USB

4.7 New master headset pairing to base

You may designate a new master headset for your base.

Important: Before designating a new master headset, ensure that the original headset’s link to the base unit is

closed by pressing its talk button. The telephone or USB indicator should not ﬂash.

To designate a new master headset:

1. Place the new master headset into the charging cradle of the base.

2. Press the base’s pairing button.

–> Both the telephone and USB mode buttons on the

base, and the headset’s link indicator, will light for

2 seconds. This indicates successful pairing of the new

master headset.

GN9350e

GN9330e

GN9330e USB

4.8 Establishing a Clean Audio Mode link

In the PC phone (VoIP) use case many Uniﬁed

Communication applications (e.g. Cisco IP Communicator

or Microsoft® Lync™ 2010) deliver voice mails in the inbox

of the e-mail application (e.g. Outlook).

Further, many users have a separate application for conference

calls (with or without video). In these use case it is also very relevant to use your headset.

In situations where other applications than the PC phone application

wants to use the headset (as just described), you need to establish

a Clean Audio Mode link without triggering the soft phone hook-oﬀ

command.

The Clean Audio Mode functionality is implemented as a double-tap

on the headset’s talk button.

For example, if you want to participate in a conference call or listen to a voice-mail delivered by

email, simply activate the Clean Audio Mode by double-tapping the headset’s talk button on

the headset. When ending the conference call just single tap the headset’s talk button to close

the Clean Audio Mode.

Note: that you have to set the Audio Preference in the Windows operation system to the GN9330e or GN9350e.

Also, in the conference call application (e.g. Windows Live Meeting), you have to set the Audio preferences to the

GN9330e or GN9350e.

5. Use with DECT cordless telephones

GN9350e

GN9330e

GN9330e USB

Your headset can also be used with DECT cordless telephones (Digital Enhanced Cordless

Telecommunication), which are GAP-compatible (Generic Access Proﬁle). You must ﬁrst pair the

headset to the base unit of the cordless telephone.

Important: Your headset’s authentication code is 0000, which is the same code as for most DECT

cordless telephones. Your headset will only work with cordless telephones with the 0000 code.

To pair your headset to your DECT cordless telephone:

1. Press and hold down the headset’s talk button and mute button (at tip of volume control)

for 5 seconds.

–> The headset’s link indicator will ﬂash rapidly.

2. Activate the cordless telephone’s GAP mode. Consult your cordless telephone’s manual GAP

compatibility/pairing instructions.

–> The headset’s link indicator will light for 2 seconds to indicate successful pairing. Your

headset is now ready to use with your cordless telephone. Consult your cordless telephone’s

user manual for using your headset with your cordless telephone.

3. Note that the headset must be re-paired to the GN9350 base to resume normal operation.

6. Replacing the battery pack (GN accessory)

GN9350e

GN9330e

GN9330e USB

6.1 Adding extra battery charging facility

An extra battery charging facility is available as an accessory. This can

be attached to your base to allow you to charge an extra battery.

To add the extra battery charging facility cover:

1. Remove the blind cover from the base by sliding it upward until

removed.

2. Slide the extra battery charger into the base charge tower until it clicks in place.

The extra battery can be charged in its receptor on the back of the charge tower. An indicator

above the receptor will light when the battery is placed correctly and is charging. The indicator

will turn oﬀ when battery is fully charged.

16 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jabra gn 9330 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jabra gn 9330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info