Bedienungsanleitung Jabra GN1000 (Seite 3 von 31) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

488698

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

4 5

6. Position the ring sensor on the centre of the telephone speak-

er.

Note: On most telephones the speaker is located underneath

the handset. If you are unsure of the speaker’s location, have

someone call you and note the precise location where the ring-

ing tone comes from.

7. Insert the AUX plug of the connector cord into the AUX socket

at the bottom of the base unit of your cordless headset.

After assembling the product, verify that the product is working cor-

rectly. Complete the following steps:

1. Set your cordless headset to headset mode by pressing the

multifunction/line button on your cordless headset or remote

unit.

If the product is working properly, the lifting arm will lift the

handset out of the telephone’s cradle and you will hear the dial

tone in the headset.

2. If there is no dial tone, adjust the lifting arm height with the

lifting arm height control. The + raises the lifting arm and the

- lowers the lifting arm.

Note: If you still do not hear a dial tone, extend the Lifter Arm

from its factory-set position.

Features and customisation

On-line indicator

The on-line indicator lights when your handset is lifted and you

have a dial tone, and ﬂ ashes continuously when you have deacti-

vated the ring sensor.

Adjusting the Ring Sensor sensitivity

The ring sensor detects the telephone’s ring and is factory pre-set

to most standard telephones. The ring sensor may, however, need

adjustment to recognise a less common telephone ring tone. Raise

and lower the ring sensor’s sensitivity by adjusting the ring sensitiv-

ity control on the back of the unit.

The ring sensor is set correctly when the on-line indicator lights to

indicate an incoming telephone call. If the on-line indicator does not light when the tele-

phone rings, have someone call you and turn the ringer sensitivity control clockwise

until the on-line indicator is lit.

If you have unsuccessfully tried to increase ring sensor sensitivity, mount the external

ring sensor by completing the following:

1. Mount the plug of the external ring sensor to the external socket of the product.

2. Remove the protective ﬁ lm on the external ring sensor and attach it as close as pos-

sible to the telephone’s speaker.

3. Readjust the ring sensor’s sensitivity if the on-line indicator does not light when an

incoming call is received.

Answering and making telephone calls

To answer a telephone call, press the multifunction/line button on

your cordless headset or remote unit. The product will then auto-

matically lift the handset and put the call through.

To terminate a telephone call, press the multifunction/line button on

your cordless headset or remote unit. The product will now lower

the telephone handset and terminate the call.

Note: When using your telephone in speakerphone mode, e.g. for

a conference call, deactivate the ring sensor by pressing the ring

sensor on/off button to the off mode. The on-line indicator will ﬂ ash

when the ring sensor on/off button is in the off mode.

Press the ring sensor’s on/off button to the on setting when you

have completed your speakerphone call.

GN1000_contents.indd 4-5 11-03-2003, 14:15:14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jabra GN1000 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info