Bedienungsanleitung Jabra m5390 (Seite 19 von 80) (Englisch)

227989

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

English

10. Using the Jabra M5390 Multiuse headset with multiple Bluetooth

-enabled devices

Your Jabra M5390 Multiuse headset can be paired with up to 8 devices. However, only two can be

connected (paired with the headset, turned on and in range) with the headset at one time. This could

be any two Bluetooth

devices (for example, a cell phone and the Jabra M5390 Multiuse base, or the

Jabra A335w Dongle and a cell phone, or two cell phones). Therefore, if the headset is in range of

the Jabra M5390 Multiuse base or Jabra A335w Dongle, only one additional Bluetooth

device can be

connected to the headset (paired with the headset, turned on and in range).

The headset is by default paired with the base and the dongle. This means that the headset will

automatically connect to these two devices from the factory if in range and turned on. Therefore, if a cell phone

needs to be connected to the headset, either the dongle or base has to be turned off or placed out of range.

It is also possible to have two Bluetooth

-enabled cell phones connected to the Jabra M5390 Multiuse

headset simultaneously. In this case, both the base and the dongle should be disconnected from the

headset.

11. Operating devices in multiuse scenarios

Using the button interface of the headset, it is possible to operate both connected devices in a

multiuse scenario (the two devices connected to the headset). Operations can be divided into

receiving incoming and placing outgoing calls.

If receiving an incoming call from either of the connected devices, this device will automatically be

the device “in use” and a tap of the button will answer the call. Press the buttone to cancel the call.

If you would like to place an outgoing call activated from the headset, you must manually place

one of the devices “in use”. When a device is placed “in use“, everytime a button is pressed on

the headset, the instruction is sent to the selected device. For example, if you wish to make a call

using Voice Dial on the second connected device, you must first make sure that the second device

is “in use”. After confirming the device is “in use“, simply tap the button to activate Voice Dial.

In order to switch between the two connected devices, press the Answer/End button for

app. 1.5 seconds.

After swaping the “in use“ status of two devices, different indicators will be used to indicate

which device is now “in use”; When activating the Jabra A335w dongle as “in use“, the LED of the

dongle will give 5 quick light-blue flashes. Also the speaker of the headset will say “Dongle in

focus”. When activating the Jabra M5390 base as “in use“, the LED on the base will give 5 quick

light-blue flashes. Also the speaker of the headset will say “Base in focus”. When activating a cell

phone as “in use“ the speaker of the headset will say “Mobile in focus”.

Please note that this only applies to multiuse scenarios. If the headset is only connected to one

device, then this device will automatically be “in focus”.

Also note that the Last Number Redial command does not use the “in focus” concept. Upon

double tapping the Answer/End button, the Last Number Redial command will automatically

be sent to the connected device with the most recent incoming call (which was received while

connected to the headset).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jabra m5390 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jabra m5390

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info