5
ENGLISH
JABRA SUPREME
PAIR A NEW OR SECOND DEVICE
1. Ensure that the Jabra SUPREME UC is turned on.
2. Tap the Voice Control button on the Jabra SUPREME UC until
you are prompted to ”Say a command”.
3. Say ”Pair new device” and follow the pairing instructions.
NOTE: If you have disabled Voice Guidance and Control you can
put Jabra SUPREME UC in pairing mode manually by holding the
Answer/end button while ipping the boom arm to On position.
The Status Display will ash blue to indicate that you are in pairing
mode.
RE-PAIRING THE JABRA LINK 360 ADAPTER
1. Remove the Jabra LINK 360 adapter from the PC, and turn o
the Jabra Supreme UC and other headsets.
2. Put the Jabra Supreme UC in pairing mode by press and
holding the Answer/end button and opening the ip boom
arm. Release the button when you hear ”Welcome, you are now
ready for pairing”.
3. Put the Jabra LINK 360 adapter into the PC to begin pairing
automatically. It can take up to 1 minute to pair. The Jabra
LINK 360 status LED will ash blue. When the status LED turns
steady blue, the pairing is complete.
TIP: For extra functionality download and install Jabra PC Suite
from www.jabra.com/setup, and run Jabra Control Center.
