Bedienungsanleitung Janome 2160DC (Seite 47 von 48) (Englisch)

602078

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Troubleshooting

Condition

The needle thread

breaks.

The bobbin thread

breaks.

The needle breaks.

Skipped stitches

Seam puckering

The cloth is not

feeding smoothly.

Stitches form loops

below the works.

The machine does not

work.

Buttonhole sewing is

not sewn properly.

The machine does not

run smoothly and is

noisy.

1. The needle thread is not threaded properly.

2. The needle thread tension is too tight.

3. The needle is bent or blunt.

4. The needle is incorrectly inserted.

5. The needle thread and the bobbin thread are not set under the

presser foot when start sewing.

6. The threads were not drawn to the rear after sewing.

7. The thread is either too heavy or too fine for the needle.

1. The bobbin thread is not threaded properly in the bobbin holder.

2. Lint has collected in the bobbin holder.

3. The bobbin is damaged and doesn’t turn smoothly.

4. The thread is wound loosely on a bobbin.

1. The needle is incorrectly inserted.

2. The needle clamp screw is loose.

3. The threads were not drawn to the rear after sewing.

4. The needle is too fine for the fabric being used.

5. The presser foot is not appropriate for the stitch pattern being sewn.

1. The needle is incorrectly inserted, bent or blunt.

2. The needle and/or threads are not suitable for the work being sewn.

3. A Blue Tipped needle is not being used for sewing stretch, very fine

fabrics and synthetics.

4. The needle thread is not threaded properly.

5. A poor quality needle is used.

1. The needle thread tension is too tight.

2. The needle thread is not threaded properly.

3. The needle is too heavy for the fabric being sewn.

4. The stitch length is too long for the fabric.

1. The feed dog is packed with lint.

2. The stitches are too fine.

3. The feed dog is not raised after “drop feed” sewing.

1. The needle thread tension is too loose.

2. The needle is either too heavy or too fine for the thread.

1. The machine is not plugged in.

2. Thread has been caught in the hook race.

3. The bobbin winder spindle is not returned to the left after bobbin

winding.

1. The stitch density is not suitable for the fabric being sewn.

2. Suitable interface material has not been used for the stretch or

synthetic fabric.

1. Thread has been caught in the hook race.

2. Lint has built up in the hook race or bobbin holder.

Reference

See page 13, 14

See page 17, 18

See page 9

See page 19

See page 9

See page 12

See page 43

Replace the bobbin.

See page 11

See page 9

See page 19

See page 9

Change the presser foot.

See page 9

See page 13, 14

Change the needle.

See page 17, 18

See page 13

See page 9

Make the stitches shorter.

See page 43

Make the stitches longer.

See page 9

See page 17, 18

See page 9

See page 4

See page 43

See page 11

See page 29

Use an interfacing.

See page 43

Cause

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Janome 2160DC Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info