472818
6
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
4
SECTION II. GETTING READY TO SEW
Connecting the Power Supply
Using the foot control
Turn off the power switch q.
Insert the foot control plug w into the foot control jack e.
Insert the machine plug r into the power inlet t.
Insert the power supply plug y into the wall outlet u.
Turn on the power switch q.
The foot control sign i will be displayed when the
foot control is connected to the machine.
q Power switch
w Foot control plug
e Foot control jack
r Machine plug
t Power inlet
y Power supply plug
u Wall outlet
i Foot control sign
q
e
w
r
u
t
q
w
t
e
r
Using the start/stop button
Turn off the power switch q.
Insert the machine plug w into the power inlet e.
Insert the power supply plug r into the wall outlet t.
Turn on the power switch q.
q Power switch
w Machine plug
e Power inlet
r Power supply plug
t Wall outlet
NOTE:
The start/stop button does not work when the foot
control is connected.
i
WARNING:
While in operation, always keep your eyes on the sewing
area, and do not touch any moving parts such as the
thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the
power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise the
machine will run inadvertently.
Before Using Your Sewing Machine
Before using your sewing machine for the first time,
place a scrap of fabric under the presser foot and run
the machine without thread for a few minutes. Wipe away
any oil which may appear.
Operating Instructions:
The symbol “O” on a switch indicates the “off” position of
a switch.
For appliances with a polarized plug (one blade wider
than the other): To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in any
way (U.S.A. and Canada only).
*Foot control model YC-485EC-1 is used with this
sewing machine.
y
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Janome DC1050 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info