472822
52
Zoom out
Zoom in
Vorherige Seite
1/78
Nächste Seite
50
Button Sewing
Machine Setting
Pattern: 08 (Mode 1)
Thread tension:3-7
Presser foot: Satin stitch foot F
Foot pressure: 3
Feed dog: Dropped
Unthread the needle thread.
Adjust the stitch width so that the needle enters both
holes in the button.
Place a button on the fabric and lower the needle by
turning the handwheel, so that the needle enters into the
left hole in the button.
Align the holes in the button with the slot on the foot and
lower it to hold the button in place.
Turn the handwheel to lower the needle into the right
hole in the button.
Adjust the stitch width if necessary.
Rethread the machine and sew about 10 stitches.
NOTE:
The LCD screen shows a warning to raise the feed dog,
but depress the foot control again to start sewing.
Raise the presser foot and remove the fabric.
Trim both needle and bobbin threads at the beginning.
Cut both threads leaving 20 cm (8”) tails.
Pull the bobbin thread to bring the needle thread to the
wrong side of the fabric then knot the threads.
1 Needle Thread at the Beginning
2 Bobbin Thread
3 Needle Thread
1
2
3
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Janome Memory Craft 6500P wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info