Bedienungsanleitung Jata CP830 (Seite 13 von 28) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

797786

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

•Set the iron temperature selector (3) to its maximum position (MAX) by turning it clockwise. If you

wish a lower temperature on the sole plate leave the temperature selector in ( ) position.

•Plug the appliance into the mains and the indicator light (2) will light on.

•Await until the pilot light (2) goes off. At this moment the appliance is ready to be used.

STEAM IRONING

•Remember that the iron temperature selector (3) must be set to its maximum position or in the

steam position ( ).

•Press with the index ﬁnger the steam button (1) for the steam begin to ﬂow. It is advisable to use

the button in short intervals.

ATTENTION:

•When pressing the steam pusher the pump starts to pass water intermittently to the

steam chamber. This intermittent noise of the pump is absolutely normal.

•You can ﬁll the tank at any moment bearing in mind that you must unplug the appliance from the

mains while doing it. If you have the precaution for keep the tank always with water, the appliance

can work in a continuous way, without need of waits, this appliance becomes irreplaceable for any

type of ironing, including thick garments or great dimensions.

•You can also iron curtains and other garments vertically without needing to take them down. Bring

near the iron in vertical position to the garment and press the steam outlet button (1).

DRY IRONING

•Plug the appliance into the mains and set the temperature selector (3) in the desired position.

•FIBRASSINTÉTICAS/SINTHETICFIBRES:Softtemperature(•)

•SEDA–LANA/SILK–WOOL:Mediumtemperature(••)

•ALGODÓN–LINO/COTTON–LINEN:Hightemperature(•••)

•When the indicator light (2) is switch off, the iron has reached the selected temperature.

•Do not press the steam pusher.

TRANSPORT HANDLE

•The appliance includes a handle to move the unit easily. To open just lift it up. To storage, keep

pressed the two pushers (6) and place it in its original position.

MAINTENANCE AND CLEANING

•Before you proceed to cleaning the appliance, ensure it is unplugged from the mains.

•Do not empty the water thank may kept in the tank, unless you are not going to use the appliance

for a long time.

•Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the

surfaces of the appliance.

•Use a slightly damp cloth.

•The soleplate may be cleaned with a cloth soaked with vinegar. This whole operation is more easily

carried out when the soleplate is warm.

•After using the appliance wait for the iron to cool before storing.

ENVIRONMENT PROTECTION

•Dispose the appliance according to the local garbage regulations.

•Never throw it away to the rubbish. So you will help to the improvement of the

environment.

MANUAL CP830.indd 13 12/12/18 15:59

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jata CP830 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info