509324

Jay-tech SpeedShot TDC9H4 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
5.3 Formatting the memory or micro SD card
1. Press the menu button ( ) in PHOTO or VIDEO mode.
2. Select the setup mode by press the right button.
3. Select the format icon by press the
W
( ) button and press the SHUTTER button to
confirm.
4. Select Internal memory / SD card then press the SHUTTER button.
5.4 Setting the resolution
The camera can be set to different resolutions.
1. Press the menu button ( ) in PHOTO mode, select the resolutions icon by
W
( ) key
and press the SHUTTER to confirm.
Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536),
5M (2560 x 1920), 8M (3264x2448), 12M (4032 x 3024)
2. Six different resolutions will be displayed. Select the desired resolution by using the up or
down buttons and press the SHUTTER button to confirm the selection.
5.5 Taking photographs
1. Turn on the camera.
2.
Depending on the distance to the object being photographed, use macro switch to adjust
the distance. Select the flower symbol ( ) if you wish to take a close-up photograph
(11cm –18cm).
If you wish to take video or photograph of surroundings or people (0.5m – infinity),set the
macro switch to normal mode ( ).
3. If you are not sure if there is enough lighting, turn the automatic flash( ) on by pressing
the flash button. (If the battery power is too low, the flash won’t be activated).
4. Use the LCD screen to aim the object you wish to take photograph.
Use the face detection to aim the people you wish to take photograph.
5. Press SHUTTER button and wait until the LCD display turn on again.
6. If ‘SMILE’ detection is ON, shutter will be activate automatically once a smile face is
detected
Caution: 1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6 Zoom in and out
The camera can zoom in up to 8 times.
Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the
maximum zoom ratio.
5.7 Self-timer setting
You can use the self-timer function when you wish to take a photograph for yourself or when you
wish to take a photograph for an object which the camera must be as still as possible.
1. Set the camera to photo mode.
2. Press the MENU button ( ). The menu will appear.
3. Press the
W
( ) button to select Capture Mode and confirm by pressing the SHUTTER
button.
4. Press the
W
( ) button to set the delay time: 10S Timer.
5. Press the SHUTTER button to confirm. The self-timer function is now ready for use.
6. Aim at the object you wish to take photo.
7. Press the SHUTTER button to take a photograph.
8.
The photo will be taken after the timer reaches the delay time that you pre-setted and the
camera will beep during the delay time.
5.8 Recording video clips
1. Press the MODE button to select the video clip mode( ).
2. For setting the resolution, Press MENU ( ) button and select Resolution, then press the
SHUTTER button to confirm. Two resolution will be displayed.
VGA (640 x 480) QVGA( 320 x 240).
3. Press the SHUTTER button to start recording video, press the SHUTTER button again to
stop recording. The video clip will now be saved as an AVI file in the camera memory.
5.9 Playback photographs
1. Press the( ) button to get into playback mode.
2. Press the left or right buttons to see photographs.
3. In full screen display , press the
T
( )
button to zoom in the photo.
4. To view images in thumbnail, press the
W
( ) button.
5. To shift the image in zoom-in mode, press the SHUTTER button then use the
up/down/left/right buttons.
6. Press the MENU ( ) button in Playback mode, press and hold MENU button again until
the menu options displayed. Select SLIDE SHOW and slide show time then press the
ENTER button to confirm. The pictures saved in your camera or your micro SD card will be
displayed in sequence automatically. To stop slide show, press ENTER button again.
5.10 Playback video clips
1. When video clips are displayed, press the SHUTTER button to start playing the video and
press the SHUTTER button again to pause the playback.
2. press right button to fast forward or press left button to rewind.
3. Press the down button to stop.
4. Press the mode button to exit.
5.11 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or delete all the photographs / video
clips in the memory.
Follow the instructions given below to delete photograph.
1. Press the ( ) button to enter the playback mode.
2. Press left or right button to select photograph/video clip to be delete.
3. Press the MENU/delete button and select Delete This Image(Video) / All .
4. Press the SHUTTER button ,then select OK to confirm.
5. Press the mode button to exit.
NOTE: Select “All” and Press the SHUTTER button to confirm, all the pictures and videos will be
deleted.
6. Connecting to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video files
for storage.
7. Specifications
Sensor 5.0 Mega pixel CMOS sensor
12.0 Mega pixels: (4032x3024)
8.0 Mega pixels: (3264x2448)
5.0 Mega pixels: (2560x1920)
3.0 Mega pixels: (2048x1536)
1.3 Mega pixels: (1280x960)
Image resolution
VGA: (640x480)
Lens F/2.8 f = 8.5mm
Focus range 0.5m. ~ Infinity
Macro mode 11cm – 18cm
Digital zoom 8x
Flash strobe Built-in ( Auto / force / off )
LCD display 2.7" TFT color display
White balance Auto / Daylight / Cloudy / Fluorescent / Tungsten
Video mode 20fps@VGA&30fps@QVGA with micro SD card
External memory card SD card supports up to 8GB
File format Picture: JPEG, Video: AVI
Self timer
10 seconds
PC interface USB 2.0
Power source 2xAAA alkaline batteries
8. System requirement
Operating system
Windows XP / Vista or above
Mac 9.x or X.x
CPU Pentium III or above
RAM At least 64MB
Interface USB port
CD 4x speed CD ROM or above
9. Troubleshooting
Problem
Cause
Solution
Cannot turn on the camera
Low battery power.
Battery placed at wrong
polarities.
Replace or install the battery
correctly.
Photos can not be saved
when taking pictures.
The memory card or built-in
memory hasn’t been
formatted properly.
Format the memory in setup
mode of the camera. Please
refer to section 5.3.
Cannot find removable disk
after connecting the
camera to the computer
.
Connection failure. Make sure all cable connections
are secured and restart the
computer if necessary.
Flash does not work. Battery power is too low. Replace with new 2xAAA
alkaline batteries.
The batteries used up very
fast.
Incorrect or old, used up,
battery
Replace with new 2xAAA
alkaline batteries.
The photos are blurry 1. The camera is not held
steadily
2. The lens of camera is
dirty.
1. Hold the camera steadily until
it beeps when taking video
photo.
2. Clean the lens with soft dry
cloth.
For EU only
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

jay-tech-speedshot-tdc9h4

Suche zurücksetzen

  • Wie bekomme ich das Fach zum Baterrie wechseln auf Eingereicht am 15-10-2023 16:13

    Antworten Frage melden

  • Die Kamera macht so verschwommene Bilder , was wäre den die beste Einstellung das es einiger maßen gute Fotos werden. Bin leider kein großer Fotograf :-)
    Beste Grüße
    Peter Eingereicht am 8-7-2019 13:02

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Jay-tech SpeedShot TDC9H4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Jay-tech SpeedShot TDC9H4

Jay-tech SpeedShot TDC9H4 Bedienungsanleitung - Deutsch - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info