Bedienungsanleitung JB systems CLUB7-USB (Seite 6 von 12) (Englisch)

756976

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH USER MANUAL

JB SYSTEMS 4/7 Club7usb

1. [LEVEL]: Adjusts the input level on each channel. Use this control to adjust the level on the VU-meter at

about 0dB.

2. CHANNEL VU METER: Each channel has its own LED VU-meter so you can adjust the gain level (1)

very quickly. Make sure the levels do not exceed 0dB (or 100%). The audio risks to be distorted when

the signal level comes in the red zone of the VU-meter.

3. INPUT SOURCE SELECTOR: Used to select the correct input on each channel: Phono, line, USB, aux

or CD. There are also additional input selectors on the back.

Hint: Line, Aux, CD, Tuner, etc… are different names for inputs with almost the same signal levels.

4. [TALKOVER]: Use the switch to automatically mute the input channels 1 to 4 while you are talking

through a microphone connected to [MIC 1], [MIC 2] or [MIC 3]. You can adjust the amount of muting on

input channels 1 to 4. The more you turn the talkover level to the right, the more these channels are

muted while talking through one of the microphones connected to [MIC 1], [MIC 2] or [MIC 3].

5. [AUX]: 3.5mm stereo mini-jack input to connect external sources (for example : smartphone, tablet or

PC). This input is controlled by channel 4. Connecting an external source will take priority over the

internal player.

6. [BALANCE]: used to adjust the balance between left and right output on the [Master].

7. [POWER]: The blue led is lit when the mixer is turned on.

8. [MASTER] VU METERS: Monitors the output level of the [master]. Make sure the levels do not exceed

0dB (or 100%). The audio will be distorted when the signal level comes in the red zone of the VU-meter.

9. [MASTER]: Used to adjust the level of the balanced [Master] output.

10. [BOOTH]: Used to adjust the level of the unbalanced [BOOTH] output.

11. [SD-CARD READER]: for the use of SD cards (max. 16GB – FAT 32). The card reader is controlled by

channel 4. The inserted SD card will have priority above the USB memory stick. It is NOT possible to use

both SD card and USB stick simultaneously.

12. [USB socket]: for the use of USB memory sticks (max. 16GB – FAT 32) with a one level folder structure

for replay of WMA, WAV and MP3 files. Note that this socket does NOT support USB hard drives,

neither for memory size nor for power requirements. The USB memory stick is controlled by channel 4.

13. Display: shows information such as playing time, track name, …

A. Time Display: shows elapsed/remaining

time while the media player is used.

B. Elapsed time: is displayed while “E” is lit.

C. Remaining time: is displayed while “R” is lit.

D. Not used!

E. 8-Digit Text Readout: The file name of the

currently playing track is shown, with its first

30 digits scrolling through the display. Note

that this is NOT an ID3 tag readout, but a file

name readout, so files must be named

properly to yield a sensible displayed

content. The display will show the file name

and alternate with the folder name the current file is located in. Whether at a specific time the file

or the folder name is displayed, is indicated by the respective symbols (F/G)

F. Folder Name Display Indicator: This indicator shows that the current content of the text

readout (E) is a folder name.

G. File Name Display Indicator: This indicator shows the current content of the text readout (E) is

a file name.

H. FM-indicator: Not used!

I. Play Sequence Indicator: This indicator shows whether the unit is set to straight sequential or

random play sequence. The setting can be altered by the play sequence button (15).

J. Play Mode Indicator: Based on the selection made by the play mode button (14), this part of

the display shows the letters “SPL”, “SLO”, “ACO” or ALO“.

K. Player status: shows if the player is in play, pause or stop mode. See play/pause button (16).

14. Play mode selector: Selects between the different playback modes of the media player:

 SPL = Single Play: The player stops after playing the current song once.

 SLO = Single Loop: The player loops the current song endlessly.

 ACO = All Continuous: The player continues after playing the current song. The next song is

determined by the chosen sequence. The player stops after the sequence is executed once.

 ALO = All Loop: The player continues after playing the current song. The next song is

determined by the chosen sequence. The player repeats the sequence endlessly.

This selected play mode is displayed in the display (J).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JB systems CLUB7-USB Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JB systems CLUB7-USB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info