Bedienungsanleitung JB systems CMX-24 (Seite 4 von 49) (Deutsch, Englisch, Holländisch, Französisch)

497793

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

ENGLISH OPERATION MANUAL

JB SYSTEMS

3/93 CMX24

FUNCTIONS (FRONT)

1. BLACK OUT button: Used to switch between black out (every DMX value at 0) and normal. The led

beside the button blinks when the BLACK OUT function is activated. The DMX values will nevertheless

be shown trough the green leds. (see number30/31)

2. FULL-ON button: As long as this button is pushed in, all channels will have the same maximal intensity,

regardless the working mode and the black out function. The dark button (number 15) has priority above

the full-on button

3. TAP SYNC button: By pressing this button twice you will adjust the chase speed. By moving the

{SPEED} fader, this stored speed will be erased. This doesn’t apply for the preset B faders (number 29)

of which the speed is stored.

4. HOME button: Only useful in Chase/Scenes mode (check the chapter “How to use” for more

information). Using this button you can switch a channel that is set in BLIND mode (see <BLIND>

button) back in normal mode. So you have to press <HOME> + <PRESET A/B x> to switch a preset B

fader back in normal mode.

5. BLIND button: Only useful in Chase/Scenes mode (check the chapter “How to use” for more

information). With this button you can switch a channel in BLIND mode. In this mode, the intensity of the

channel will only be determined by the preset fader (A for the channels 1 to 12, B for the channels 13 to

24) and the master A fader. Chases or scenes that are stored in a preset B fader don’t have an

influence. So, you have to press <BLIND> + <PRESET A/B x> to switch a channel in blind mode.

6. AUDIO button: Using this button you can (de)activate the audio function (LED above the Audio button

is ON/OFF). When the audio function is active, the speed of the passing of scenes of chases will be

determined by an audio signal, acquired by the internal microphone or supplied by the LINE IN

connector (number 5 on the rear side of the CMX24). The {SPEED} fader, <STEP> and <TAP SYNC>

buttons don’t have an influence. You cannot use the audio function for chases of which the speed is

stored in a preset B fader.,

7. STEP button: Using this button, you can view the scenes of chases manually. The {SPEED} fader has

to be set in the lowest position (SHOW MODE) or you have to work in the EDIT mode. This button

doesn’t have and influence on chases of which the speed is stored in a preset B fader.

8. HOLD button: As long as you press this button, the current scene will be maintained. When you release

this button, the new scene will fade in with a time that is set with the FADE fader. With the DARK, FULL-

ON, BLACK OUT, PRESET buttons you can still change the scene.

ENGLISH OPERATION MANUAL

JB SYSTEMS

4/93 CMX24

9. PARK button:

 Single Preset mode: no function

 Double Preset mode: flash button for MASTER B fader ( take the {FADE} fader into account)

 Chase/Scene mode: button to choose between Single chase or Mix chase

10. 1-24 Button: Flash button for the MASTER A fader ( take the {FADE} fader into account)

11. RECORD/SHIFT button: Used to program steps or to switch to the program mode. This button has,

when pressed together with the shift button, different functions depending of the combination of buttons:

Examples:

 <RECORD/SHIFT>: Store a scène in the working memory.

 <RECORD/SHIFT> + <REC EXIT>: For programming or leaving the Edit mode.

<RECORD/SHIFT> + <RECCLEAR>: Erasing the working memory

 <RECORD/SHIFT> + <1>, <5>, <6>, <8>: Activate the program mode

 <RECORD/SHIFT> + <1>, <3>, <2>, <3>: Erasing thewhole memory can only be done from the

program mode.

 <RECORD/SHIFT> + <% or 0-255>: Choosing the display mode (% or DMX-value)

<RECORD/SHIFT> + <5>, <5>, <5>: Choosing the 5 min range for the {SPEED} fader.

 <RECORD/SHIFT> + <10>,<10>, <10>: Choosing the 10 min range for the {SPEED} fader.

12. ADD KILL/RECEXIT button:

 ADD mode: ([ADD KILL] led OFF) When you press a preset flash button, it will have the maximal

intensity, without taking the {FADE} fader into account.

 KILL mode: ([ADD KILL] LED ON)

o Single/Double preset mode: Pressing one or more preset A or B buttons will put these

channels on 100% intensity. The other channels will be put out.

o Chase/Scenes mode: Pressing one or more preset A buttons will put these channels

on 100% intensity. The other channels will be put out. Pressing a preset B button will

put this channels on 100% intensity, without taking the {FADE} fader into account.

This last is in fact the ADD mode.

 <RECORD/SHIFT> + <ADD KILL/REC EXIT>: With this combination of buttons you can leave

the program or edit mode.

13. PAGE/REC CLEAR button:

 <PAGINA/REC CLEAR>: With this button you can flip trough the 4 pages. The 4 LEDs above

this button show which page is currently active.

 <RECORD/SHIFT> +<PAGINA/REC CLEAR>: Used to clear the working memory.

14. MODE SELECT/REC SPEED button:

 MODE SELECT: With this button you can choose between Chase/Scenes, Single preset and

Double preset mode.

 REC SPEED: (in MIX mode!) In combination with a preset B fader, this button also allows you to

store the speed of a chase in a preset B fader in Chase/Scenes mode.

o Set the chase on the wanted speed with the {SPEED} fader or the <TAP SYNC>

button. Place the {SPEED} fader in the lowest position (SHOW MODE) to erase the

speed.

o Press <MODUS SELECT/REC SPEED> + <PRESET B x> to store the speed.

15. DARK button: As long as this button is pressed all the channels will be set at zero, regardless the

mode, the black out, and the full-on function.

16. EDIT/ALL REV button:

 Edit: used to switch to the edit mode:<EDIT/ALL REV> + <PRESET B x>

 ALL REV: Used to change the direction of all chases

17. INSERT/% or 0-255 button:

 INSERT: Used to add a scene to a chase (for more info, see “editing a Chase”)

 % or 0-255: Changing the display mode (switching between % and DMX-values)

18. DELETE/REV ONE button:

 DELETE: used to delete a scene in a chase for more info, see “editing a Chase” and “deleting

scenes”)

 REV ONE: Changing the direction of one chase: <DELETE/REV ONE> + <PRESET B x>

19. UP/ CHASEREV button:

 UP: Increasing the level of a channel in edit mode: <UP/CHASE REV> + <PRESET A/B x>

 CHASE REV: used to change the direction of all the chases of which the speed isn’t stored in a

preset B fader.

JB systems CMX-24 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info