Bedienungsanleitung JBL 4305P (Seite 3 von 12) (Englisch)

793363

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

EN EN

Pg 3 of 11

4305P OM | Part No: 950-0597-001 | Rev 1.0

4. General Placement / Set-up

Room Placement

Position each speaker in a vertical orientation with the tweeter on the top. The speakers should

be placed so the listening position and the two speakers form an equilateral triangle.

On the back of the Primary speaker, set the bass contour switch based on the speaker's

proximity to side boundaries such as walls, inside a bookcase / cabinet, or on ﬂoor stands.

Recommended Bass Contour settings

When positioned away from side boundaries or on a stand set to 0dB.

When positioned close to side boundaries or when the speaker is inside of a cabinet or

bookcase set to -3dB.

On the back of the Primary speaker, set the L/R Assign switch to identify the Primary speaker

based on your selected positioning.

Speaker System Set-up

1. Make sure AC Main switch is set to Oﬀ.

2. Connect the provided AC cords between the AC Inlets on the back of both speakers and the other end to your home AC outlet.

3. Connecting the Primary Speaker to the Secondary Speaker:

a. Hardwired: Attach one end of the supplied CAT6 cable to the Digital Link connector on the back of the Primary speaker and

the other end to the Digital Link connector on the back of the Secondary speaker. Maximum CAT5 cable length 23' (7m). This

will deliver the highest level of audio quality at 192kHz / 32bit between the two speakers. Both speakers Power LEDs will

illuminate solid Yellow when tethered together.

b. Wireless: Each pair of 4305P have been pre-paired for wireless connectivity at the factory. Maximum distance between

speaker should be 30' (9m) or less. Maximum audio quality through wireless connection is 96kHz 24bit. Both speakers Power

LEDs will illuminate solid White when connected wirelessly.

i. Wireless Note: If for some reason the speakers in this system become un-associated from each other follow the

following steps:

1. Verify both speakers are On.

2. On the back of the Secondary speaker, Press and Hold the Sync button for >3 seconds. The Power LED will

illuminate and ﬂash Yellow color.

3. On the back of the Primary speaker, Press and Hold the Sync button for >3 seconds. The Power LED will illuminate

and ﬂash Yellow color.

4. When association is successfully completed, both Primary and Secondary speaker Power LEDs will Illuminate solid

Green.

4. Turn the volume down located on the Primary speaker.

5. Set the AC main switch on the back of both speakers to On.

Note: When powered up, the system will boot-up, indicated by all LEDs on the front panels ﬂashing White. Once the boot-up process

is completed, the system automatically enters an initial network setup mode.

BASS

CONTOUR

0dB

-3dB

BASS

CONTOUR

0dB

-3dB

L/R

ASSIGN

󶜁󶛾

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL 4305P Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JBL 4305P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info