Bedienungsanleitung JBL Authentics L8 (Seite 11 von 16) (Englisch)

561705

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Operation

Authentics L8

To initiate AirPlay streaming from a computer with iTunes,

1. Launch iTunes.

1. Click the AirPlay button that appears at

the bottom of the iTunes window.

2. Select JBL_L8_WF_XXXXXX in the pop-up

list, where XXXXXX is the last six characters

of the system’s MAC address.

To initiate AirPlay streaming from an iPod, iPhone, or iPad

device,

1. Tap the AirPlay button on the device’s screen.

2. Select JBL_L8_WF_XXXXXX in the

speaker selection drop-down list.

The AirPlay audio stream will break in and stop the currently

playing source. If the system is in Sleep mode, it will turn on

and begin playing the AirPlay audio stream.

You can change the display name of your JBL Authentics L8

using the JBL Music app or the JBL Authentics setup page.

Operating through DLNA

You can use DLNA

compliant software to stream audio to

your JBL Authentics L8 from a PC or Android device that is

connected to the same network. To operate through DLNA,

from the media player software, select audio to play back

on the JBL_L8_WF_XXXXXX, where XXXXXX is the last six

characters of the system’s MAC address. The DLNA audio

stream will break in and stop the currently playing source. If

the system is in Sleep mode, it will turn ON and begin playing

the DLNA audio stream. Check your media player software

documentation for more details.

The JBL Authentics L8 is a DLNA Digital Media Renderer

(DMR) device. Your media player software must be capable

of acting as a DLNA Digital Media Server (DMS) and Digital

Media Controller (DMC) to initiate the audio stream. Third

party DLNA software can be found online, or on Google Play

for Android devices. Compatible software can also be found

on the Apple App Store for a Mac or iOS device.

The JBL Authentics L8 is capable of playing MP3, WMA, AAC,

or PCM audio files via DLNA.

Operating through Aux Input

To play music through Aux input in the system:

1. Connect the auxiliary device to the Aux in jack

using a stereo 3.5 mm (1/8” auxiliary cable).

2. Switch to the Aux input source.

3. Control music playback through the auxiliary device.

AUX IN

WPS

iPad

Operating through Digital Optical Input

The digital optical input port in the system allows the system

to play raw PCM at a sample rate of 44.1 kHz or 48 kHz. If any

audio signal is available in the digital optical input, the system

detects the signal and starts playing music.

ON / OFFPOWEROPTICAL

Web Page Functions

You can access the web page to change Wi-Fi settings or

upgrade the device firmware. You can access the web page

by typing its IP address into your browser on your Mac or PC.

To find the IP address, access your router’s setup page. For

more information, consult the documentation of your router.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL Authentics L8 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JBL Authentics L8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info