7
Logic 7, and then press this button to see
the specific mode choices that are avail-
able. For more information on mode
selection, see page 31.
9Tuning Selector: Press the left side
of the button to tune lower-frequency sta-
tions and the right side of the button to
tune higher-frequency stations. When a
station with a strong signal is reached,
the TUNED Indicator Iwill be lit in
the Main Information Display ˜.
)‹Button: When making system con-
figuration changes using the front-panel
controls, press this button to scroll left
through the available choices for the
option being adjusted.
!Tuner Band Selector: Pressing this
button will automatically switch the
AVR580 to the Tuner mode. Pressing it
again will switch between the AM and
FM frequency bands. (See page 35 for
more information on the tuner.)
@Set Button: When making system
configuration changes using the front-
panel controls, press this button to enter
a setting into the unit’s memory.
#›Button: When making system con-
figuration changes using the front-panel
controls, press this button to scroll right
through the available choices for the
option being adjusted.
$Preset Station Selector: Press this
button to scroll up or down through the
list of stations that have been entered
into the preset memory. (See page 35 for
more information on tuner programming.)
%Input Source Selector: Press this
button to change the input source.
^Tuner Mode Selector: Press this but-
ton to select Auto or Manual tuning. When
the button is pressed so that the AUTO
Indicator Jlights, the tuner will search
for the next station with an acceptable sig-
nal when the Tuning Selector 9u
é
is pressed. When the button is
pressed so that the AUTO Indicator J
is not lit, each press of the Tuning
Selector 9u
é
will increase the fre-
quency. (See page 35 for more information
on using the tuner.) This button may also
be used to switch between Stereo and
Mono modes for FM radio reception.
When weak reception is encountered,
press the button until the STEREO
Indicator Hgoes out to switch to Mono
reception. Press and hold again to switch
back to Stereo mode. (See page 35 for
more information on using the tuner.)
&Optical 3 Digital Input: Connect the
optical digital output of an audio or video
product to this jack.
*Coaxial 3 Digital Input: Connect
the coaxial digital input of a digital audio
product such as a portable audio player
or video game to this jack.
(Video 4 Video Input Jacks: These
jacks may be used to connect the video
play/out jacks of a video game or
portable video product such as a cam-
corder, video game or digital still camera
to your system.
ÓVideo 4 Audio Input Jacks: These
audio/video
jacks may be used for connec-
tion to the audio play/out
jacks of a video
game or portable audio/video product
such as a camcorder or portable audio
player.
ÔBass Control: Use this control to
boost or reduce the low-frequency output
of the left/right front channels by as
much as ±10dB. Set this control as you
find suitable to adjust to your specific
taste or room acoustics.
Balance Control: Use this control to
change the relative volume for the front
left/right channels.
NOTE: When multichannel surround
modes are in use, this control should be
at the midpoint, or “12 o’clock,” position
for proper operation.
ÒTreble Control: Use this control to
boost or reduce the high-frequency output
of the left/right front channels by as
much as ±10dB. Set this control as you
find suitable to adjust to your specific
taste or room acoustics.
ÚChannel Adjust Selector: Press the
button to begin the process of adjusting
the channel level outputs using the
source currently playing through your
AVR. For complete information on adjust-
ing the channel output level, see page 36.
ÛDelay Adjust Selector: Press this
button to begin the process of adjusting
the delay settings for Dolby surround
modes. See page 26 for more information
on delay adjustments.
ÙDigital Input Selector: Press this
button to begin the process of selecting a
digital source for use with the currently
selected input. Once the button has been
pressed, use the ‹or ›Buttons )#
to choose the desired input and then
press the Set Button @to enter the
setting into the unit’s memory. See page
31 for more information on digital audio.
ıVolume Control: Turn this knob
clockwise to increase the volume, coun-
terclockwise to decrease the volume.
If the AVR580 is muted, adjusting the
volume will automatically release the
unit from the silenced condition.
ˆInput Indicators: The current
input source for the AVR580 will light
in orange.
˜Main Information Display: This
display delivers messages and status
indications to help you operate the
receiver. (See page 8 for a complete
explanation of the Information Display.)
¯Remote Sensor Window: The sen-
sor behind this window receives infrared
signals from the remote control. Aim the
remote at this area and do not block or
cover it unless an external remote sensor
is installed.
˘Surround Mode Indicators: The
surround mode and digital bitstream in
use will light in orange. Note that
depending on the specific combination of
input sources and surround mode select-
ed, more than one indicator may light.
(See page 34 for more information.)
