809486
24
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
2424
8. SOUND SETTINGS
8.1 Audio sync
With the audio sync function, you can synchronize audio and
video to make sure that no delay is heard from your video content.
1. On the remote control, press and hold TV for more than three
seconds and then, press .
JSYNC” is displayed.
2. Within ve seconds, press or on the remote control to
adjust the audio delay and match with video.
JThe audio sync timing is displayed.
8.2 Smart mode
With the smart mode enabled by default, you can enjoy TV
programs with rich sound effects. For TV programs such as
news and weather forecasts, you can reduce sound effects by
disabling the smart mode and switching to the standard mode.
Smart mode: EQ settings and JBL Surround Sound are applied
for rich sound effects.
Standard mode: The preset EQ settings are applied for standard
sound effects.
To disable the smart mode, do the following:
On the remote control, press and hold for more than three
seconds and then, press .
JYou switch to another mode. “OFF SMART MODE”: The
standard mode is enabled.
JNext time you switch on the soundbar, the smart mode is
enabled again automatically.
8.3 PureVoice dialogue enhancement
technology
By taking advantage of the PureVoice dialogue enhancement
technology, the PureVoice allows you to enhance vocal clarity
and easily hear and understand speech.
By default, the PureVoice is enabled if you play movies from
the TV/ HDMI IN source; and the PureVoice is disabled if you
stream music over Bluetooth, Chromecast built-in, Alexa Cast
and AirPlay.
To disable or enable the voice mode,
On the remote control, press and hold for more than ve
seconds and then, press .
J“ON PUREVOICE”: The PureVoice is enabled.
J“OFF PUREVOICE”: The PureVoice is disabled.
JNext time you switch on the soundbar, the Purevoice is
enabled again automatically.
9. RESTORE FACTORY SETTINGS
By restoring the default settings dened at factories. you remove
all your personalized settings from the soundbar.
On the soundbar, press and hold , and for more than
5 seconds.
JRESET” is displayed.
JThe soundbar restarts.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JBL BAR 1300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JBL BAR 1300

JBL BAR 1300 Bedienungsanleitung - Deutsch - 31 seiten

JBL BAR 1300 Bedienungsanleitung - Holländisch - 31 seiten

JBL BAR 1300 Bedienungsanleitung - Französisch - 32 seiten

JBL BAR 1300 Kurzanleitung - Alle Sprachen - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info