Bedienungsanleitung JBL BAR 1300 (Seite 27 von 31) (Englisch)

809486

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

2727

www.jbl.com

English

• 2.4G Wi-Fi transmitter frequency range: 2412 - 2472 MHz

(2.4 GHz ISM Band, USA 11 Channels, Europe and others

13 Channels)

• 2.4G Wi-Fi transmitter power: <20dBm (EIRP)

• 5G Wi-Fi transmitter frequency range: 5.15 - 5.35GHz,

5.470 - 5.725GHz, 5.725 - 5.825GHz

• 5G Wi-Fi transmitter power: 5.15 - 5.25GHz <23dBm,

5.25 - 5.35GHz & 5.470 - 5.725GHz <20dBm,

5.725 - 5.825GHz <14dBm (EIRP)

• 2.4G wireless transmitter frequency range:

2406 - 2474 MHz

• 2.4G wireless transmitter power: <10 dBm (EIRP)

Dimensions

• Total soundbar dimensions (W x H x D):

1376 x 60 x 139 mm / 54.2” x 2.4” x 5.5”

• Main soundbar dimensions (W x H x D):

1000 x 60 x 139 mm / 39.4” x 2.4” x 5.5”

• Detachable surround speaker dimensions (each) (W x H x D):

202 x 60 x 139 mm / 8” x 2.4” x 5.5”

• Subwoofer dimensions (W x H x D):

305 x 440.4 x 305 mm / 12” x 17.3” x 12”

• Soundbar weight: 4.3kg / 9.5 lbs

• Detachable surround speaker weight (each):

1.17 kg / 2.57 lbs

• Subwoofer weight: 10 kg / 22 lbs

• Packaging dimensions (W x H x D):

381 x 1107 x 477 mm / 15” x 43.6” x 18.8”

• Packaging Weight: 21.45 kg / 47.2 lbs

13. TROUBLESHOOTING

Never try to repair the product yourself. If you have problems

using this product, check the following points before you request

services.

System

The unit will not turn on.

• Check if the power cord is plugged into power and the

soundbar.

The soundbar has no response to button pressing.

• Restore the soundbar to factory settings (See “9. RESTORE

FACTORY SETTINGS”).

Sound

No sound from soundbar

• Make sure that the soundbar is not muted.

• Select the correct audio input source on the remote control.

• Connect the soundbar to your TV or other devices properly

• Restore the soundbar to its factory settings by pressing

and holding , and on the soundbar for more than

5 seconds.

Distorted sound or echo

• If you play audio from your TV through the soundbar, make

sure that your TV is muted or the built-in TV speaker is

disabled.

Audio and video are not synchronized.

• Enable the audio sync function to synchronize audio and

video (See “8.1 Audio sync”).

No height sound effects of Dolby Atmos

• If your TV supports HDMI ARC only, make sure that you have

connected your digital device to the soundbar through the

HDMI IN connector on the soundbar (See “5.1.1 TV (HDMI

ARC / eARC)”)

• Enjoy the sound effects of Dolby Atmos when you play

movies from the TV / HDMI source. For audio streaming over

Bluetooth or casting apps (enabled by Chromecast built-in,

AirPlay or Alexa Cast), Dolby Atmos is not supported.

Bluetooth

A device cannot be connected with the soundbar.

• Check if you have enabled Bluetooth on the device.

• If the soundbar has been paired with another Bluetooth

device, reset Bluetooth (see “5.2.3 To connect to another

Bluetooth device”).

• If your Bluetooth device has ever been paired with the

soundbar, reset Bluetooth on the soundbar, unpair the

soundbar on the Bluetooth device, and then, pair the

Bluetooth device with the soundbar again (see “5.2.3 To

connect to another Bluetooth device”).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL BAR 1300 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JBL BAR 1300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info