Bedienungsanleitung JBL BAR 9.1 TRUE WIRELESS SURROUND (Seite 11 von 25) (Englisch)

809509

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

www.jbl.com

English

1111

1. Connect the soundbar with your TV by using an optical cable.

2. Use an HDMI cable (V2.0 or later) to connect your TV with your

digital device, such as a streaming device, set-top box, DVD/

Blu-ray player or game console.

3. To play audio through the optical cable, select on the

remote control.

NOTES:

−* The HDMI cable (for digital device connection) and the optical cable

are sold separately.

−Full compatibility with all HDMI-CEC devices is not guaranteed.

−When both HDMI ARC and optical cables are connected to the

soundbar for audio input from TV connection, the HDMI ARC

connection is prioritized.

5.2 Bluetooth connection

Through Bluetooth, connect the soundbar with your Bluetooth

device, such as a smartphone, tablet and laptop.

Settings Bluetooth

Bluetooth

DEVICES

JBL Bar 9.1_xxxx

Now Discoverable

Connected

< 10 m / 33 ft

BT PAIRING

Connect a Bluetooth device

1. Press to switch on (See “Power-on/Auto standby/Auto

wakeup” in the “PLAY” chapter).

2. To select Bluetooth source, press on the soundbar or on

the remote control.

→“”: Ready for BT pairing

3. On your Bluetooth device, enable Bluetooth and search for

within three minutes.

→Successful connection: The device name is displayed

if your device is named in English. A conrmation tone

is heard.

To reconnect the last paired device

Your Bluetooth device is retained as a paired device when the

soundbar goes to standby mode. Next time you switch to the

Bluetooth source, the soundbar reconnects the last paired

device automatically.

To connect to another Bluetooth device

1. In the Bluetooth source, press and hold on the soundbar or

on the remote control until “ ” is displayed.

→The previously paired device is cleared from the soundbar.

→The soundbar enters the Bluetooth pairing mode.

2. Follow the Step 3 under “Connect a Bluetooth device”.

• If the device has ever been paired with the soundbar, rst

unpair on the device.

NOTES:

−The Bluetooth connection will be lost if the distance between the

soundbar and Bluetooth device exceeds 33 ft (10 m).

−Electronic devices may cause radio interference. Devices that generate

electromagnetic waves must be kept away from the Soundbar, such

as microwaves and wireless LAN devices.

5.3 Connection with your home network

Through Wi-Fi or an Ethernet cable, connect the soundbar to your

home network. With Chromecast built-in* and AirPlay supported,

the soundbar allows you to stream audio on smartphones or

tablets through the soundbar speakers.

NOTE:

−*Some features require subscriptions or services not available in all

countries.

1. On the soundbar, enter the Wi-Fi setup mode:

• Press to switch on (See “Power-on/Auto standby/Auto

wakeup/Power-saving mode” in the “PLAY” chapter).

→If the soundbar has not been connected to a network,

the screen shows “ ” and then, “ ”.

• To re-enter the Wi-Fi setup mode, press and hold until

“ ” is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL BAR 9.1 TRUE WIRELESS SURROUND Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JBL BAR 9.1 TRUE WIRELESS SURROUND

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info