809509
17
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
www.jbl.com
English
1717
7.2 Play from the TV source
With the soundbar connected, you can enjoy TV audio from the
soundbar speakers.
TV
OPTICAL
HDMI eARC/
HDMI ARC
1. Make sure that your TV is set to support external speakers
and the built-in TV speakers are muted. Refer to the owner’s
manual of your TV for more information.
2. Make sure that the soundbar has been properly connected to
your TV (See “Connection with your TV and digital devices” in
the “CONNECT” chapter).
3. To select the TV source, press on the soundbar or on
the remote control.
”: The TV source is selected.
In the factory settings, the TV source is selected by default.
NOTES:
If the soundbar is connected to your TV through both an HDMI cable
and an optical cable, the HDMI cable source is selected for the TV
connection.
7.2.1 TV remote control setup
To use your TV remote control for both your TV and the soundbar,
check that your TV supports HDMI-CEC. If your TV does not support
HDMI-CEC, follow the steps under “TV remote control learning”.
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV user manual. You can control the volume +/-, mute/
unmute, and power on/standby functions on your soundbar
through the TV remote control.
TV remote control learning
1. On the soundbar, press and hold and + until “
is displayed.
You enter the TV remote control learning mode.
2. Within 15 seconds, do the following on the soundbar and your
TV remote control:
a) On the soundbar: press one of the following buttons +, -,
+ and - together (for the mute/unmute function), and .
b) On your TV remote control: press the desired button.
” is displayed on the soundbar.
”: The function of the soundbar button is learnt
by your TV remote control button.
3. Repeat Step 2 to complete the button learning.
4. To exit the TV remote control learning mode, press and hold
and + on the soundbar until “ ” is displayed.
The soundbar returns to the last selected source.
7.3 Play from the HDMI IN source
With the soundbar connected as shown, your digital device can
play video on your TV and audio from the soundbar speakers.
1
HDMI IN
HDMI OUT
2
.
.
.
HDMI
(ARC)
1. Make sure that the soundbar has been properly connected to
your TV and digital device (See “Connection with your TV and
digital devices” in the “CONNECT” chapter).
2. Switch on your digital device.
Your TV and the soundbar wake up from standby mode
and switch to the input source automatically.
To select the source on the soundbar, press
on the soundbar or on the remote control.
3. Switch your TV to standby mode.
The soundbar and source device are switched to standby mode.
NOTES:
Full compatibility with all HDMI-CEC devices is not guaranteed.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JBL BAR 9.1 TRUE WIRELESS SURROUND wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JBL BAR 9.1 TRUE WIRELESS SURROUND

JBL BAR 9.1 TRUE WIRELESS SURROUND Bedienungsanleitung - Deutsch - 25 seiten

JBL BAR 9.1 TRUE WIRELESS SURROUND Bedienungsanleitung - Holländisch - 25 seiten

JBL BAR 9.1 TRUE WIRELESS SURROUND Bedienungsanleitung - Französisch - 25 seiten

JBL BAR 9.1 TRUE WIRELESS SURROUND Kurzanleitung - Alle Sprachen - 35 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info