Bedienungsanleitung JBL Cinema BD100 (Seite 3 von 31) (Englisch)

810185

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

www.jbl.com

English

TaBle of ConTenTs

INTRODUCTION 3

VERIFY LINE VOLTAGE BEFORE USING 3

UNPACKING 3

INSTALLATION LOCATION 4

CLEANING 4

MOVING THE RECEIVER 4

SUPPLIED ACCESSORIES 4

RECEIVER FRONT-PANEL CONTROLS 5

RECEIVER REAR-PANEL CONNECTIONS 6

REMOTE-CONTROL FUNCTIONS 8

CONNECTIONS 10

PREPARING THE REMOTE CONTROL 14

SETTING UP THE RECEIVER 15

USING THE RECEIVER 19

USING THE DISC PLAYER 21

PLAYING STREAMING MEDIA VIA YOUR HOME NETWORK 23

LISTENING TO FM RADIO 24

LISTENING TO AUDIO SOURCES 24

PLAYING FILES FROM USB DEVICES AND DATA DISCS 24

USING PLAYLISTS 27

TROUBLESHOOTING 28

SPECIFICATIONS 29

inTRoDuCTion

Please register your product on our Web site at www.jbl.com.

Note: You’ll need the product’s serial number. At the same time,

you can choose to be notied about our new products and/or

special promotions.

THANK YOU FOR CHOOSING JBL® PRODUCTS!

The BD series of home theater systems offers a complete home

entertainment solution with a wealth of listening and viewing options. To get

the maximum enjoyment from your new system, we urge you to read this

manual thoroughly and refer back to it as you become more familiar with

your new system’s features and their operation.

If you have any questions about this product, its installation or its operation,

please contact your retailer or custom installer, or visit our Web site at www.

jbl.com.

VeRify line VolTage BefoRe using

Your BD receiver has been designed for use with 100 – 240-volt,

50Hz/60Hz AC current and includes a detachable power cable intended for

use in the region where the system is sold.

Connection to a line voltage other than that for which the unit is intended

can create a safety and re hazard and may damage the unit. If you have

any questions about the voltage requirements for your specic model or

about the line voltage in your area, contact your dealer before plugging the

unit into a wall outlet.

unpaCking

The carton and shipping materials used to protect your new receiver during

shipment were specially designed to cushion it from shock and vibration.

We suggest that you save the carton and packing materials for use in

shipping if you move or if the unit ever needs repair.

To minimize the size of the carton in storage, you may wish to atten it. You

can do it by carefully slitting the tape seams on the carton’s bottom and

collapsing it. You can store cardboard inserts in the same manner. Packing

materials that cannot be collapsed should be saved along with the carton in

a plastic bag.

If you do not wish to save the packaging materials, please note that

the carton and other sections of the shipping-protection materials are

recyclable. Please respect the environment and discard those materials at a

local recycling center.

Remove the protective plastic film from the front-panel lens. Leaving the

film in place will affect the performance of your remote control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL Cinema BD100 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info